01157692

Component

https://doi.org/10.3141/2195-07

http://scholar.google.com...Lord&publication_year=2010

Increased emphasis has been placed on improving the explicit role of highway safety in making decisions on highway planning, design, and operations. This end can be achieved by quantifying the safety effects of geometric design elements for various highway facilities. The objective of this study was to investigate the safety effects of two important design elements for freeways: ramp density and horizontal curve. Data available for use in the evaluation included 324.2 centerline mi of freeways collected in Texas. Five years (1997–2001) of freeway crashes were examined. Negative binomial regression models were used to estimate the effects of independent variables on crashes. The final model for evaluation revealed that crashes on freeway segments were associated with average daily traffic, on-ramp density, degree of curvature, median width with inside shoulder, the number of lanes (for urban freeways), and whether the freeway is in an urban or rural area. Off-ramp density was not statistically significant in the model. Furthermore, the effect of on-ramp density on freeway crashes was significant for horizontal curves but not for tangent sections and indicates that freeway designers should eliminate or minimize the number of on-ramps within the horizontal curves. The statistical modeling results were geared into the development of accident modification factors for on-ramp density and horizontal curves that can be used for safety prediction of freeways.

01331160

10-2979

English

pp 58-69

2010

Transportation Research Record: Journal of the Transportation Research Board

9780309160711

Print

Figures (3) ; References (16) ; Tables (7)

Crash modification factors; Freeways; Geometric design; Highway curves; Highway design; Highway safety; Mathematical models; On ramps; Traffic crashes

Horizontal curvature; Negative binomial regression

Texas

Design; Highways; Safety and Human Factors; I20: Design and Planning of Transport Infrastructure

TRIS, TRB, ATRI

Jan 25 2010 11:27AM

• Application of Kozeny–Kovacs Model to Predict the Hydraulic Conductivity of Permeable Pavements
• Application of Precast Concrete Barrier Adjacent to Steep Roadside Slope
• Buried Duct Network for Utility Cables Along Roads and Highways: Results of Field Trials
• Criteria for Passing Sight Distance for Roadway Design and Marking
• Determining Lengths of Left-Turn Lanes at Signalized Intersections Under Different Left-Turn Signal Schemes
• Development of Guidelines for Anchor Design for High-Tension Cable Guardrails
• Effect of a New Cross-Section Design on Low-Volume Roads
• Evaluation of Highway Design Parameters on Influencing Operator Speeds Through Casewise Visual Evaluation
• Evaluation of the Maryland Abutment Scour Equation Through Selected Threshold Velocity Methods
• Improving the Effectiveness of Wayshowing for America’s Byways Using Perspective of a Visitor’s Eye: Concepts and Techniques to Increase Appreciation and Action by Byway Providers
• Limits of Acceptable Rail-and-Post Deflection in Crash-Damaged Strong-Post W-Beam Guardrail
• New Test Level 2 Rough Stone Masonry Guardwall
• Optimum Urban Clear Zone Distance
• Risk-Based Highway Design: Case Studies from British Columbia, Canada
• Roadway Departure and Impact Conditions
• Rural Expressway Intersection Design Guidance: Suggestions for AASHTO Green Book and "Manual on Uniform Traffic Control Devices"
• Truck Acceleration Speeds and Distances at Weigh Stations