TRB Pubsindex
Text Size:

Title:

Quality Control–Quality Assurance Sampling Strategies for Hot-Mix Asphalt Construction

Accession Number:

01122098

Record Type:

Component

Availability:

Transportation Research Board Business Office

500 Fifth Street, NW
Washington, DC 20001 United States
Order URL: http://www.trb.org/Main/Public/Blurbs/162223.aspx

Find a library where document is available


Order URL: http://worldcat.org/isbn/9780309126144

Abstract:

The effects of sampling strategies and size on statistically based decision making in hot-mix asphalt (HMA) construction are presented. For sample sizes agreed on by the agency and the contractor, an acceptable level for an HMA mix parameter is determined with risk balanced between the two organizations. With increased emphasis on specific performance requirements, the use of performance tests on HMA specimens prepared from in situ samples is developing. Examples include direct measures of mix stiffness and permanent deformation characteristics. A measure of rutting resistance, the stabilometer S-value, is used by the California Department of Transportation (Caltrans) for quality control–quality assurance (QC/QA) projects. Although the S-value was used for this simulation because extensive tests were available, this approach is applicable to any performance measures already in use, such as HMA thickness or compacted air void content. A sampling scheme and sampling size through statistical simulation of a fixed length of a one-lane-width placement of HMA are discussed. Sample size is based on the combination of the sample size of the contractor and that of the agency to balance the risk to both organizations and results in a mix that will meet the minimum performance requirement. An example is given for the placement of 15,000 tons of HMA according to Caltrans QC/QA requirements. For this total tonnage, the contractor and agency are respectively assumed to perform a specific number of stabilometer tests for QC and QA. Results of the simulation yield the average stabilometer value that the contractor must obtain to ensure that the quality requirement, that is, the minimum S-value, is met.

Monograph Title:

Construction 2009

Monograph Accession #:

01138792

Report/Paper Numbers:

09-2768

Language:

English

Authors:

Tsai, Bor-Wen
Monismith, Carl L

Pagination:

pp 51-62

Publication Date:

2009

Serial:

Transportation Research Record: Journal of the Transportation Research Board

Issue Number: 2098
Publisher: Transportation Research Board
ISSN: 0361-1981

ISBN:

9780309126144

Media Type:

Print

Features:

Figures (9) ; References (3) ; Tables (4)

Uncontrolled Terms:

Geographic Terms:

Subject Areas:

Construction; Highways; Pavements; I52: Construction of Pavements and Surfacings

Files:

TRIS, TRB, ATRI

Created Date:

Jan 30 2009 7:07PM

More Articles from this Serial Issue: