01116577

Component

https://doi.org/10.3141/2075-02

http://scholar.google.com...eson&publication_year=2008

Numerous published models can be used to predict curve speed based on geometric and operational characteristics like radius, superelevation rate, and approach tangent speed. Speed-based design consistency measures have also been developed to help identify which curves on a roadway are the most severe. However, the use of speed reduction alone can result in improper assessment of curve severity because drivers are more reluctant to reduce speed on roadways with higher speeds and thus accept speeds associated with higher crash risk. New measures of curve severity are suggested, based on considerations of side friction demand and kinetic energy. The increase in side friction demand above drivers’ comfort thresholds is shown to be roughly proportional to the kinetic energy reduction associated with speed reduction. Agencies can use these curve severity measures to assist in identifying curves in their jurisdictions that would most likely benefit from safety improvements.

01116578

English

pp 8-15

2008

Transportation Research Record: Journal of the Transportation Research Board

9780309113496

Print

Figures (6) ; References (14) ; Tables (3)

Evaluation and assessment; Highway curves; Kinetic energy

Curve severity; Design consistency; Side friction demand

Design; Highways; I20: Design and Planning of Transport Infrastructure

TRIS, TRB, ATRI

Dec 15 2008 3:45PM

• Influence of the General Character of Horizontal Alignment on Operating Speed of Two-Lane Rural Roads
• Level-of-Safety Service for Safety Performance Evaluation of Highway Intersections
• Operating Speed Prediction Models for Horizontal Curves on Rural Four-Lane Highways
• Safety Evaluation of Installing Center Two-Way Left-Turn Lanes on Two-Lane Roads
• Safety Impacts of Access Control Standards on Crossroads in the Vicinity of Highway Interchanges