00183796

Component

http://onlinepubs.trb.org...r/1978/665v2/665v2-023.pdf

https://scholar.google.co...meld&publication_year=1978

Prestressed Concrete Bridges of uniform or near uniform cross-section are admirably suited to construction by precasting segments and post-tensioning. This form of construction, however, introduces additional design and construction problems--problems of carrying flexure, shear and torsion across joints--the most suitable type of joint,--problems introduced by superelevation and constructional tolerances. As the length of the structure increases, the effective prestress is reduced markedly until it is no longer economical to stress in one operation. The method of stage stressing will overcome these problems, however more complex analysis and design is required. Solutions to these problems are discussed with particular reference to several large prestressed concrete box girder bridges recently constructed in Australia. /Author/

This paper appeared in Transportation Research Record No. 665, Bridge Engineering, Volume 2. Proceeding of a conference conducted by the Transportation Research Board, September 25-27, 1978.Distribution, posting, or copying of this PDF is strictly prohibited without written permission of the Transportation Research Board of the National Academy of Sciences. Unless otherwise indicated, all materials in this PDF are copyrighted by the National Academy of Sciences. Copyright © National Academy of Sciences. All rights reserved

01489599

pp 192-199

1978

Transportation Research Record

Bridge Engineering Conference, 1st, 1978, St Louis, Missouri, USA

0309026970

Print

Figures (9) ; References (6)

Box girders; Construction management; Cross sections; Engineering tolerance; Joints; Prestressed concrete; Superelevation

Construction; Highways

TRIS, TRB

Dec 12 1978 12:00AM

• A CRITICAL EXAMINATION OF THE WAVE EQUATION
• AERODYNAMIC STABILITY OF TWO CABLE-STAYED BRIDGES
• ANALYSIS AND TESTING OF A TRAPEZOIDAL BOX GIRDER BRIDGE
• APPLICATION AND DESIGN OF PRESTRESSED DECK PANELS
• APPLICATION OF PREFABRICATED HOLLOW STEEL DECKS TO BRIDGE CONSTRUCTIONS
• CONCRETE CABLE-STAYED BRIDGES
• CONSIDERATIONS IN THE DEVELOPMENT OF AN EARLY WARNING VESSEL/BRIDGE COLLISION SYSTEM
• CURRENT PRACTICE IN DESIGN AND INSTALLATION OF DRIVEN PILES
• DEVELOPMENT OF A SIMPLIFIED METHOD OF LATERAL LOAD DISTRIBUTION FOR BRIDGE SUPERSTRUCTURES
• DYNAMIC RESPONSE OF A SINGLE TRACK RAILWAY TRUSS BRIDGE
• DYNAMIC RESPONSE OF BRIDGES
• ECONOMICAL STRUCTURES FOR LOW-VOLUME ROADS
• FATIGUE TESTS OF PRESTRESSED GIRDERS WITH BLANKETED AND DRAPED STRANDS
• INCREASING THE SEISMIC RESISTANCE OF EXISTING HIGHWAY BRIDGES
• LABORATORY AND FIELD STUDIES OF A PEDESTRIAN BRIDGE COMPOSED OF GLASS REINFORCED PLASTIC
• METHODS OF CALCULATION OF THE WIND-INDUCED RESPONSES OF SUSPENDED-SPAN BRIDGES
• MODEL STUDIES OF DOUBLE-CELL BOX GIRDER BRIDGE WITH INTERMEDIATE DIAPHRAGMS
• MULTIPLE SERVICE LEVEL BRIDGE RAILINGS--PERFORMANCE AND DESIGN CRITERIA
• PRACTICAL BRIDGE RETROFIT CONCEPTS TO REDUCE DAMAGE PRODUCED BY SEISMIC MOTIONS
• RECENT DEVELOPMENT OF CONSTRUCTION TECHNIQUES IN CONCRETE BRIDGES
• REDUCING THE RISK OF CATASTROPHIC BRIDGE FAILURES
• SEGMENTAL BRIDGE CONSTRUCTION IN WESTERN EUROPE--IMPRESSIONS OF AN IRF STUDY TEAM
• STRUCTURAL PROBLEMS FOR THE MESSINA NARROWS BRIDGE
• SYSTEMS CONSTRUCTION TECHNIQUES FOR SHORT-SPAN CONCRETE BRIDGES
• TEST RESULTS FROM THE CONESTOGO RIVER BRIDGE
• THE DESIGN AND CONSTRUCTION OF THE NEW RIVER GORGE BRIDGE
• THE DEVELOPMENT OF THE ONTARIO HIGHWAY BRIDGE DESIGN CODE
• TRAFFIC LOADING OF LONG SPAN BRIDGES
• TRANSVERSE POST-TENSIONING OF LONGITUDINALLY LAMINATED TIMBER BRIDGE DECKS
• WEB STRESSES IN PRESTRESSED CONCRETE BRIDGE BEAMS HAVING DISCONTINUOUS TENDONS