01025608

Component

https://doi.org/10.3141/1947-02

http://scholar.google.com...wara&publication_year=2006

Experimental investigations were conducted to determine the fundamental joint opening behavior of concrete pavements and to evaluate the effects of dowel misalignment on this behavior. The parameters included in the experimental investigations were the number of dowel bars (one, two, three, or five) at the joint, the dowel misalignment type (horizontal, vertical, or combined), misalignment magnitude (0, 1/36, 1/18, 1/12, 1/9 rad), and uniformity across the joint. The effects of these parameters were evaluated for the joint opening behavior and structural distresses observed in the specimens. Forty-seven instrumented laboratory-scale specimens of pavement slabs with doweled joints were tested. The experimental results include the load per dowel–joint opening behavior and observations of structural distress. These results indicate that (a) all pavement joints are initially locked, and opening displacements occur after the load per dowel exceeds 5 to 7 kN or the average bond shear stress exceeds 0.22 to 0.30 MPa; (b) for all misalignment types, the load per dowel increases with larger misalignment magnitudes and nonuniformity; (c) structural distress in the form of concrete spalling and transverse cracking was observed for specimens with larger dowel misalignments and nonuniformity; and (d) severity of structural distress increased with the number of misaligned dowels at the joint. These experimental results do not provide comprehensive knowledge regarding the mechanics of dowel–concrete interaction, and analytical investigations are needed to address this limitation.

01031683

English

pp 15-27

2006

Transportation Research Record: Journal of the Transportation Research Board

0309099552

Print

Figures (7) ; Photos; References (8) ; Tables (6)

Axle load force; Concrete pavements; Dowels (Fasteners); Laboratory tests; Pavement distress; Pavement joints; Rigid pavements; Spalling; Tie bars; Transverse cracking

Misalignments

Design; Highways; Pavements; I22: Design of Pavements, Railways and Guideways; I23: Properties of Road Surfaces

TRIS, TRB, ATRI

Mar 3 2006 10:34AM

• Accelerated Loading Testing of Stainless Steel Hollow Tube Dowels
• Characterizing Strain Induced by Environmental Loads in Jointed Plain Concrete Pavements: Immediately After Paving and Throughout First Ten Months
• Comparisons of Flexible Pavement Designs: AASHTO Empirical Versus NCHRP Project 1-37A Mechanistic–Empirical
• Concrete Pavement Performance in Midwestern Argentina Compared with Long-Term Pavement Performance Data: HDM-4 Distress Models
• Effect of Load Spectra on Mechanistic-Empirical Flexible Pavement Design
• Effect of Slab Curling on Movement and Load Transfer Capacity of Saw-Cut Joints
• Evaluation of Pavement Slab Rocking and Pumping with Elevation Profile Data
• Evaluation of Subgrade Resilient Modulus Predictive Model for Use in Mechanistic–Empirical Pavement Design Guide
• Improving Prediction Accuracy in Mechanistic-Empirical Pavement Design Guide
• Jointed Plain Concrete Pavement Model Evaluation
• Measurement and Analysis of Early-Age Concrete Strains and Stresses: Continuously Reinforced Concrete Pavement Under Environmental Loading (With Discussion and Closure)
• Mechanistic–Empirical Study of Effects of Truck Tire Pressure on Pavement: Measured Tire–Pavement Contact Stress Data
• Network-Level Evaluation of Specific Pavement Study-2 Experiment: Using a Long-Term Pavement Performance Database
• Pilot Study in Sampling-Based Sensitivity Analysis of NCHRP Design Guide for Flexible Pavements
• Practical Probabilistic Design Format for Flexible Pavements
• Seasonal Time Series Models to Support Traffic Input Data for Mechanistic-Empirical Design Guide
• Sensitivity Analysis of 2002 Design Guide Distress Prediction Models for Jointed Plain Concrete Pavement