00966576

Component

https://doi.org/10.3141/1853-14

http://scholar.google.com....+Fu&publication_year=2003

Top-down cracking is a type of cracking that rivals the severity and prevalence of reflective cracking. It significantly reduces the pavement's quality service life. Yet the nature of top-down cracking has not been completely understood. Recent studies of the causes of top-down cracking have focused on identifying the mechanisms that induce tensile stresses at the surface by applying different combinations of surface tractions and the finite element method. Asphalt concrete is treated as a uniform linear elastic material. A new and different approach is presented for investigating the causes of top-down cracking by means of micromechanics. In this approach, asphalt concrete is viewed as a bonded granular material, and the microstructure, including aggregate particle configuration and mastic stiffness, is considered. Theories that predict the existence of tensile stress under compressive loading were reviewed. Both qualitative and quantitative experimental methods were developed to observe the location of top-down cracking and to measure the tensile strains in the pavement. The experimental results indicate the following: (a) top-down cracking may initiate not only at the pavement surface but also at some distance down from the surface; (b) both tensile-type and shear-type cracking could initiate top-down cracking; and (c) top-down cracking may most likely initiate when the mastic is weaker or the pavement temperature is higher. Therefore, a mix sensitive to rutting may also be sensitive to cracking.

This paper appears in Transportation Research Record No. 1853, Pavement Management and Rigid and Flexible Pavement Design 2003.

English

p. 121-133

2003

Transportation Research Record

0309085890

Figures (12) ; References (28) ; Tables (2)

Asphalt concrete; Finite element method; Flexible pavements; Linear elasticity; Microstructure; Pavement cracking; Service life; Tension

Micromechanics; Tensile stresses

Design; Highways; Pavements; I22: Design of Pavements, Railways and Guideways; I23: Properties of Road Surfaces

TRIS, TRB, ATRI

Dec 11 2003 12:00AM

• ASSESSING IMPACT OF BUS TRAFFIC ON PAVEMENT MAINTENANCE COSTS: CITY OF LOS ANGELES
• CALIBRATION OF FLEXIBLE PAVEMENT PERFORMANCE EQUATIONS FOR MINNESOTA ROAD RESEARCH PROJECT
• COMPARISON OF AS-CONSTRUCTED AND AS-DESIGNED FLEXIBLE PAVEMENT LAYER THICKNESSES
• CRACK PROPAGATION IN PORTLAND CEMENT CONCRETE BEAMS: IMPLICATIONS FOR PAVEMENT DESIGN
• CREATING ASSET MANAGEMENT REPORTS FROM A LOCAL AGENCY PAVEMENT MANAGEMENT SYSTEM
• CURRENT STATUS AND VARIABILITY OF IN-SERVICE TRUCK TIRE PRESSURES IN TEXAS
• DECISION-MAKING PROBLEM FOR MANAGING PAVEMENT MAINTENANCE AND REHABILITATION PROJECTS
• DEFICIENCY ANALYSIS OF AS-BUILT DATABASE TO ENHANCE A PAVEMENT MANAGEMENT SYSTEM
• DETERMINATION OF DEPTH OF SURFACE CRACKS IN ASPHALT PAVEMENTS
• DEVELOPMENT OF ADAPTIVE PERFORMANCE MODELS FOR OKLAHOMA AIRFIELD PAVEMENT MANAGEMENT SYSTEM
• FORECASTING OVERALL PAVEMENT CONDITION WITH NEURAL NETWORKS: APPLICATION ON FLORIDA HIGHWAY NETWORK
• NETWORK-LEVEL PAVEMENT PERFORMANCE PREDICTION MODEL INCORPORATING CENSORED DATA
• PAVEMENT MANAGEMENT SYSTEMS: PAST, PRESENT, AND FUTURE
• PERFORMANCE MANAGEMENT SYSTEM DATA FOR MONITORING PERFORMANCE: EXAMPLE WITH SUPERPAVE (REGISTERED TRADEMARK)
• TEN-YEAR PERFORMANCE OF DOWEL-BAR RETROFIT: APPLICATION, PERFORMANCE, AND LESSONS LEARNED
• THREE-DIMENSIONAL FINITE ELEMENT ANALYSIS OF DOWELED JOINTS FOR AIRPORT PAVEMENTS
• THREE-DIMENSIONAL FINITE ELEMENT ANALYSIS OF JOINTED PLAIN CONCRETE PAVEMENT WITH EVERFE2.2
• TIRE CONTACT STRESSES AND THEIR EFFECTS ON INSTABILITY RUTTING OF ASPHALT MIXTURE PAVEMENTS: THREE-DIMENSIONAL FINITE ELEMENT ANALYSIS