00799059

Component

https://doi.org/10.3141/1701-07

http://scholar.google.com...cher&publication_year=2000

The main purpose of this research was to develop models to quantify the major components of the passing process. A second goal was to compare the results with existing highway-design models and to arrive at conclusions about the applicability of the existing models. Additional objectives were to evaluate several time elements of the passing process, such as the response time of drivers from the arrival of a proper gap until the start of the passing maneuver. The evaluation is based on an analysis of data that were collected by videotaping six tangent two-lane highway sections from high vantage points and from a helicopter hovering above one site. Normal driver behavior was not disturbed during the data collection process. About 1,500 passings were recorded; of these, 54% were characterized as "single passing," in which one driver passed a single, slower vehicle. About half of all passing maneuvers were found to involve two cars; in the other half, at least one truck was overtaken. A model showing the relationship between the speed of the impeding vehicle and the passing distance was calibrated, and the implications for highway-design procedures were discussed. Several of the findings had unique safety implications, such as the very short headway before the start of the passing maneuver and very short driver-reaction times. The primary results of the analyses enabled determination of the required passing distances and, therefore, the sight distances needed for different design speeds and various traffic combinations. Additional safety-related aspects are evaluated and discussed.

This paper appears in Transportation Research Record No. 1701, Design Speed, Operating Speed, and Sight Distance Issues.

English

p. 53-60

2000

Transportation Research Record

0309066808

Figures (4) ; References (21) ; Tables (4)

Data collection; Design speed; Drivers; Headways; Highway design; Highway safety; Passing; Passing sight distance; Reaction time; Rural highways; Slow moving vehicles; Speed; Two lane highways; Videotapes

Design; Highways; Planning and Forecasting; I21: Planning of Transport Infrastructure

TRIS, TRB, ATRI

Sep 29 2000 12:00AM

• DESIGN SPEED AND OPERATING SPEED IN RURAL HIGHWAY ALIGNMENT DESIGN
• DETERMINING THE BEST METHOD FOR MEASURING NO-PASSING ZONES
• DRIVER BRAKING PERFORMANCE IN STOPPING SIGHT DISTANCE SITUATIONS
• GEOMETRIC DESIGN OF LOW-SPEED URBAN STREETS
• MATHEMATICAL MODELS OF VEHICULAR SPEED ON MOUNTAIN ROADS
• NEW STOPPING SIGHT DISTANCE MODEL FOR USE IN HIGHWAY GEOMETRIC DESIGN
• OPERATING SPEED ON CREST VERTICAL CURVES WITH LIMITED STOPPING SIGHT DISTANCE
• RELIABILITY APPROACH TO INTERSECTION SIGHT DISTANCE DESIGN
• SAFETY EFFECTS OF LIMITED STOPPING SIGHT DISTANCE ON CREST VERTICAL CURVES
• SIGHT DISTANCE FOR STOP-CONTROLLED INTERSECTIONS BASED ON GAP ACCEPTANCE
• SPEED REDUCTION AS A SURROGATE FOR ACCIDENT EXPERIENCE AT HORIZONTAL CURVES ON RURAL TWO-LANE HIGHWAYS
• SPEED-PROFILE MODEL FOR A DESIGN-CONSISTENCY EVALUATION PROCEDURE IN THE UNITED STATES
• SUMMARY OF DESIGN SPEED, OPERATING SPEED, AND DESIGN CONSISTENCY ISSUES
• TRUCK SPEED PROFILES