Abstract:
The work presented attempts to address reflective cracking of asphalt-surfaced pavements through binder modification with a highly polymer (HP)-modified asphalt binder. Nine asphalt mixtures ranging from fine dense-graded mixtures to stone matrix asphalt (SMA) mixtures were investigated with conventional polymer modified binders and HP binder. The dynamic modulus test, overlay test (OT), and semi-circular bend (SCB) test were used to evaluate the mixtures. In the cracking tests, HP mixtures outperformed the conventionally modified control mixtures for the same mixture type. For HP mixtures, in general, SMA mixtures performed better in the cracking test than dense-graded mixtures. One of the dense-graded mixtures having larger nominal maximum aggregate size (NMAS) performed better than the mixture with a smaller NMAS, whereas the other having a larger NMAS was not significantly different in crack testing. Further, a discussion on the calculation of bulk specific gravity and percent air voids in a cut OT and SCB specimen using saturated surface dry or vacuum sealing methods is presented.
