01648169

Component

https://doi.org/10.3141/2630-14

Reflective cracking is a common issue with respect to rehabilitated asphalt pavements, especially when the rehabilitation is done by applying a hot-mix asphalt overlay on the existing damaged pavement. Several approaches can be adopted to delay reflective cracking. They include an increase of the overlay thickness and the use of a stress relief asphalt mixture (SRAM), which is a fine-graded, flexible, and thin asphalt interlayer. Because the efficiency of a SRAM is highly related to the properties of the asphalt binder used in the mixture, it is of interest to use a highly modified asphalt (HiMA) binder. This paper describes a field test comprising three sections at BR-116 (a heavily trafficked highway in Brazil). One of the rehabilitation strategies used for a cracked asphalt pavement was a 2.5-cm SRAM (produced with a HiMA binder) and 5-cm styrene–butadiene–styrene (SBS) hot-mix asphalt (HMA). The other two strategies were to apply SBS HMA overlays of different thicknesses (7.5 cm and 10.5 cm). The aim was to evaluate and compare the capability of these solutions to control reflective cracking. Rheological properties and multiple stress creep and recovery tests were performed on the asphalt binders, and the semicircular bending test was performed on the asphalt mixtures. The surface conditions were monitored, and the results for each section were compared. After a 29-month period, the section that received the interlayer had the lowest cracked area and showed better resistance than the overlays did to reflective cracking and better maintenance of the original thickness of the pavement.

01634656

17-04632

English

pp 110-117

2017

Transportation Research Record: Journal of the Transportation Research Board

9780309441841

Digital/other

Figures; Photos; References; Tables

Asphalt mixtures; Binders; Hot mix asphalt; Pavement cracking; Rehabilitation

Reflective cracking

Highways; Materials; Pavements

TRIS, TRB, ATRI

Oct 5 2017 11:12AM

• Assessment of State Agencies’ Practices in Managing Geotechnical Risk in Design–Build Projects
• Comparison of Qualifications-Based Selection and Best-Value Procurement for Construction Manager–General Contractor Highway Construction
• Density Observations from a Full-Scale, Untrafficked Test Section with Guidance for Dryback Methods
• Economic Impact Analysis of Bridge Construction
• Estimating Earthwork Volumes Through Use of Unmanned Aerial Systems
• Evaluation of Stainless Steel Fasteners for Bolted Field Splice Connections of ASTM A1010 Corrosion-Resistant Steel Plate Girders
• Exploration of Early Work Packaging in Construction Manager–General Contractor Highway Projects
• Factors Related to the Appearance of Transverse Bumps in Asphalt Overlays Placed over Crack Sealant
• Field and Laboratory Properties of Roller-Compacted Concrete Pavements
• Framework for Objectively Determining Best Practices for Alternative Contracting Methods
• Impact of Alternative Project Delivery Systems on the International Roughness Index: Case Studies of Transportation Projects in the Western United States
• Impact of High Asphalt Binder Replacement on Level Binder Properties for Controlling Reflective Cracking
• Monitoring During Lateral Bridge Slide
• New Quality Assurance Tests for Building Quality Concrete Pavement
• Project Scoping Process Model Development to Achieve On-Time and On-Budget Delivery of Highway Projects
• Roles and Responsibilities of Independent Cost Estimator in Construction Manager–General Contractor Highway Construction
• Wisconsin Department of Transportation Hot-Mix Asphalt Round Robin Laboratory Qualification Testing Program