01518643

Component

https://doi.org/10.3141/2431-07

http://scholar.google.com...+Jia&publication_year=2014

Throw-and-roll and semipermanent patches are frequently used pothole patching techniques for asphalt pavement. To evaluate the cost-effectiveness of the two patching techniques with different combinations of materials and procedures, a 14-month survey was conducted to investigate field performance of patches installed on road sections with varying weather and traffic conditions. The performance of a patch was rated according to its overall distress conditions. With failed patches rated as 0, the service time was considered in the performance index. The multiple linear regression method was used to analyze the influence of patching methods, materials, geometric features, climatic condition, and traffic factors on the performance of patches. The field survey found that the throw-and-roll patches installed in winter deteriorated very fast, mainly because of severe freezing environment and insufficient compaction and curing. The 70% throw-and-roll patches lasted less than 14 months. Patches that survived through the first winter were typically well compacted, fully cured, and tended to last much longer. Labor costs accounted for 50% to 60% of the total cost, while material costs accounted for only 20% for cold mixes and 2% to ~5% for semipermanent patches. Because of the reduced equipment and labor costs, the throw-and-roll patches had higher cost-effectiveness in the short term. However, the effectiveness of throw-and-roll patches decreased rapidly, and semipermanent patches exhibited higher cost-effectiveness in the long term. To improve the stability of patches, it is of great importance to apply sufficient compaction during installation.

01539593

14-4977

English

pp 49–56

2014

Transportation Research Record: Journal of the Transportation Research Board

9780309295178

Print

Figures (8) ; Photos; References (12) ; Tables (3)

Asphalt pavements; Cost effectiveness; Patching; Pavement maintenance; Potholes

Highways; Maintenance and Preservation; Pavements; I61: Equipment and Maintenance Methods

TRIS, TRB, ATRI

Jan 27 2014 3:45PM

• Bayesian Model for Predicting the Performance of Pavements Treated with Thin Hot-Mix Asphalt Overlays
• Defect-Based Condition Assessment of Concrete Bridges: Fuzzy Hierarchical Evidential Reasoning Approach
• Field Validation of Laboratory-Predicted Low-Temperature Performance of Hot-Poured Crack Sealants
• Measured Anchor Rod Tightening of High-Mast Light Poles in Alaska
• Modeling and Analyzing Budget-Constrained Pavement Preservation Strategies
• Pavement Performance Measures: How States See Good, Fair, and Poor
• Performance and Benefits of Michigan Department of Transportation’s Capital Preventive Maintenance Program
• Selection of Appropriate Material, Construction Technique, and Structural System of Bridges by Use of Multicriteria Decision-Making Method
• Spreadsheet Method of Forecasting the Cost of Sustaining a Set of Bridge Connections
• Using Enhanced Econometric Techniques to Verify the Service Life of Asset Interventions: A Case Study for Indiana
• Using Multiple Investigative Techniques to Assess Flushing of Chip Seal Surfaces