01503968

Component

https://doi.org/10.3141/2374-16

http://scholar.google.com...ecke&publication_year=2013

When railroad tracks pass from an earthen subgrade to a bridge, the tracks become uneven. In fact, even if the tracks are level at the time of construction, over time a dip develops. This phenomenon occurs just in front of the bridge and is a cause of greater maintenance and poor ride quality. The track before bridges typically needs to be resurfaced more frequently; this maintenance increases the cost for a railroad owner. The cause for this dip in the track is believed to be the sudden change in stiffness between the subgrade and the bridge. The most commonly used approach to neutralize this sudden stiffness change is called the stiffness transition zone method. The idea is to spread out the stiffness jump from a few centimeters to the length of about 30 m by gradually changing the stiffness of the track. However, the details of the stiffness transition zone—for instance, the length, the pattern of the stiffness change, and the effect of train speed—have yet to be studied. A dynamic track model called the three-dimensional sandwich model was developed to study and compare different stiffness transition scenarios properly. In general, results showed that the transition zone decreased the tie–ballast contact force. An increase in speed will increase the tie–ballast contact force both with and without the transition zone. A longer exponentially increasing stiffness transition zone was proved to be better in terms of decreasing the tie–ballast contact force than was the linearly increased transition zone.

01503754

13-4793

English

pp 136–142

2013

Transportation Research Record: Journal of the Transportation Research Board

9780309286893

Print

Figures (10) ; References (13)

Ballast (Railroads); Design; Railroad bridges; Railroad tracks; Stiffness

Contact force

Design; Railroads; I22: Design of Pavements, Railways and Guideways

TRIS, TRB, ATRI

Feb 5 2013 12:55PM

• Characterization of Railroad Ballast Behavior Under Repeated Loading: Results from New Large Triaxial Test Setup
• Comparison of Capacity of Single- and Double-Track Rail Lines
• Competitiveness of High-Speed Rail: Analysis for Corridor Between Lisbon, Portugal, and Madrid, Spain, Based on Discrete Choice Models
• Development of Multicriteria Decision Method for Evaluating High-Speed Rail Corridor
• Development of Two-Stage Hybrid Method to Solve High-Speed Rail Train Scheduling Problem
• Dynamic Wheel Loads of High-Speed Rail at Speeds Greater Than 400 km/h
• Economic Impacts of Amtrak Intercity Passenger Rail Service in Michigan: Community-Level Analysis
• Hierarchical Decomposition Methods for Periodic Railway Timetabling Problems
• High-Speed Rail Network Design and Station Location: Model and Sensitivity Analysis
• Impact of European Railway Traffic Management System on Human Performance in Railway Operations: European Findings
• Impacts of Short-Term Land Use by High-Speed Rail on Large Metropolises: Case Study of Madrid, Spain
• Investigation of Aggregate Properties Influencing Railroad Ballast Performance
• Measuring Rail Seat Pressure Distribution in Concrete Crossties: Experiments with Matrix-Based Tactile Surface Sensors
• Modeling Rail Operating Costs for Multimodal Corridor Planning
• Predicting Potential Railway Operational Disruptions with Echo State Networks
• Safety Effectiveness of Integrated Risk Reduction Strategies for Rail Transport of Hazardous Materials
• Simulating Ballast Shear Strength from Large-Scale Triaxial Tests: Discrete Element Method
• Simulation-Based Rail Transit Optimization Model
• System for In Situ Measurement of Neutral Temperature in Continuous-Welded Rail: Results from Laboratory and Field Tests
• Ultrasonic Tomography for Three-Dimensional Imaging of Internal Rail Flaws: Proof-of-Principle Numerical Simulations
• Use of Recycled Tire Rubber to Modify Track–Substructure Interaction