01477686

Component

https://doi.org/10.3141/2349-01

http://scholar.google.com...+Liu&publication_year=2013

Three half-turn and four half-turn hexagonal wire mesh panels were built for tensile and punch tests with and without one center-cut wire mesh panel. The study results indicated that the ultimate tensile strength or punch resistance for the three half-turn and four half-turn hexagonal wire mesh panels without any cut was similar. However, the four half-turn hexagonal wire panels showed better tensile and punch resistance after one wire broke at the panel center. This finding suggests that the presence of broken wires within the four half-turn hexagonal wire mesh panels have no significant influence on the panels’ tensile strength and punch resistance. Four half-turn hexagonal wire mesh is a better structural pattern than three half-turn hexagonal wire mesh for slope stability and river bank protection.

01495199

13-1982

English

pp 3-8

2013

Transportation Research Record: Journal of the Transportation Research Board

9780309263443

Print

Figures (13) ; Photos; References (7)

Banks (Waterways); Gabions; Geotechnical engineering; Slope stability; Tensile strength; Wire mesh

Taiwan

Geotechnology; Highways; Materials; Pavements; I42: Soil Mechanics

PRP, TRIS, TRB, ATRI

Feb 5 2013 12:27PM

• Characterization of Moisture-Dependent Changes in Stiffness of Unbound Aggregate Base Materials in Florida
• Corridor Management: A Means to Elevate Understanding of Geotechnical Impacts on System Performance
• Effect of Temperature on Shear Strength of Recycled Asphalt Shingles
• Examining Effects of Climatic Factors on Flexible Pavement Performance and Service Life
• Influence of Contact Angle on Soil–Water Characteristic Curve with Modified Capillary Rise Method
• Integrating National Database of Subgrade Soil–Water Characteristic Curves and Soil Index Properties with Mechanistic–Empirical Pavement Design Guide
• Leaching Behavior of Aluminum, Arsenic, and Chromium from Highway Structural Fills Amended with High-Carbon Fly Ash
• Leaching of Alkaline Substances and Heavy Metals from Recycled Concrete Aggregate Used as Unbound Base Course
• Need for Effective Technology Transfer to Ensure Sustainability of Otta Seal: Example from Botswana
• Otta Seal Surfacing: Practical and Economic Alternative to Traditional Bituminous Surface Treatments
• Overcoming an Environmental Surprise with Innovative, Fast-Track Technology: Case History Along I-69 Through Tennessee
• Physically Based Equation for Phase Composition Curve of Frozen Soils
• Safety Data Analysis to Evaluate Highway Alignment Consistency
• Thermally Induced Water Flux in Soils
• Validating Spring Weight Restriction Limits with Mechanistic–Empirical Failure Prediction Models: Low-Volume Roads in Manitoba, Canada