TRB Pubsindex
Text Size:

Title:

Impact of Increasing Roadway Construction Standards on Life-Cycle Costs of Local Residential Streets
Cover of Impact of Increasing Roadway Construction Standards on Life-Cycle Costs of Local Residential Streets

Accession Number:

01020081

Record Type:

Component

Availability:

Transportation Research Board Business Office

500 Fifth Street, NW
Washington, DC 20001 United States

Find a library where document is available


Order URL: http://worldcat.org/isbn/0309099676

Abstract:

With increasing damage due to the combination of increasing traffic load applications, adverse climate, and increasing frequency of trench cutting and patching associated with utility work, residential streets are requiring more frequent, extensive, and costly maintenance and rehabilitation (M&R) to maintain adequate levels of serviceability during pavement design life. Increased cost of M&R and eventual reconstruction are an added burden on already limited city budgets. To rectify this situation, city managers and engineers are looking at enhancing current structural design standards for residential streets to increase their load-carrying capacity. With an increase in load-carrying capacity, it is hoped that frequency of M&R will be reduced and the design life of such pavements will be extended. However, adopting a higher design standard has significant cost implications. The question then becomes, Will the expected increase in initial cost be offset by the significant decrease in M&R costs and corresponding increase in pavement life that will delay eventual reconstruction? The Minnesota Department of Transportation (DOT), on behalf of the Local Road Research Board, initiated a study to evaluate the impact of enhancing residential street pavement design standards to accommodate greater axle loads on life-cycle costs. The primary focus was to compare the life-cycle costs of residential streets designed using Minnesota DOT’s 5- to 7-ton and 9- to 10-ton design standards. The study concluded that life-cycle cost for the 5- to 7-ton and 9- to 10-ton design standards was not significantly different at the 95% significance level.

Monograph Accession #:

01033036

Language:

English

Authors:

Titus-Glover, Leslie
Hein, David
Rao, Shreenath
Smith, Kelly L

Pagination:

pp 45-53

Publication Date:

2006

Serial:

Transportation Research Record: Journal of the Transportation Research Board

Issue Number: 1958
Publisher: Transportation Research Board
ISSN: 0361-1981

ISBN:

0309099676

Media Type:

Print

Features:

Figures (8) ; References (6) ; Tables (6)

Uncontrolled Terms:

Geographic Terms:

Subject Areas:

Design; Economics; Finance; Highways; Maintenance and Preservation; Pavements; I22: Design of Pavements, Railways and Guideways; I23: Properties of Road Surfaces; I61: Equipment and Maintenance Methods

Files:

TRIS, TRB, ATRI

Created Date:

Mar 3 2006 11:11AM

More Articles from this Serial Issue: