TRB Pubsindex
Text Size:

Title:

EVALUATION OF AGING CHARACTERISTICS OF ASPHALTS BY USING TFOT AND RTFOT AT DIFFERENT TEMPERATURE LEVELS

Accession Number:

00625142

Record Type:

Component

Availability:

Find a library where document is available


Order URL: http://worldcat.org/isbn/030905205X

Abstract:

The aging characteristics of 20 asphalts were investigated by using the thin film oven test (TFOT) and rolling thin film oven test (RTFOT) at three temperature levels. Infrared absorption spectroscopy and the Schweyer rheometer test as well as penetration and absolute viscosity tests were used to evaluate the characteristics of the asphalts before and after the TFOT and RTFOT. Data from the field were also used to compare with the laboratory results. On the basis of percent penetration retained and absolute viscosity ratio, the RTFOT was found to be a more severe aging process than the TFOT for oven temperatures of 285 deg F and 325 deg F. However, the two processes were not significantly different at an oven temperature of 365 deg F. On the basis of carbonyl ratio, a ratio of infrared absorbance at 1700/cm and 1600/cm used to express the level of oxidation in an asphalt binder, the effects of TFOT and RTFOT are not significantly different at oven temperatures of 285 deg F and 325 deg F. However, at 365 deg F, the TFOT is a more severe aging process than the RTFOT from the standpoint of carbonyl ratio. On the basis of low-temperature constant power viscosity, the effects of TFOT and RTFOT are not significantly different at any of the three levels of temperature. As a rough estimate, the TFOT or RTFOT procedure performed at 365 deg F, 3 months of natural weathering of compacted Marshall specimens, and 6 to 9 months of aging in a pavement would result in approximately the same hardening effects on a typical paving grade asphalt used in Florida. From the results of this study, it appears feasible to use TFOT or RTFOT at higher temperature to simulate the aging process on the asphalt binder in asphalt paving mixtures in service, as well as that of the hot-mixing process.

Supplemental Notes:

This paper appears in Transportation Research Record No. 1342, Asphalt and Asphalt Additives. Distribution, posting, or copying of this PDF is strictly prohibited without written permission of the Transportation Research Board of the National Academy of Sciences. Unless otherwise indicated, all materials in this PDF are copyrighted by the National Academy of Sciences. Copyright © National Academy of Sciences. All rights reserved

Monograph Accession #:

01404979

Language:

English

Authors:

Shiau, Jih-Min
Tia, Mang
Ruth, Byron E
Page, Gale C

Pagination:

p. 58-66

Publication Date:

1992

Serial:

Transportation Research Record

Issue Number: 1342
Publisher: Transportation Research Board
ISSN: 0361-1981

ISBN:

030905205X

Features:

References (8) ; Tables (16)

Old TRIS Terms:

Subject Areas:

Highways; Materials; I31: Bituminous Binders and Materials

Files:

TRIS, TRB, ATRI

Created Date:

Oct 20 1993 12:00AM

More Articles from this Serial Issue: