01668797

Component

https://doi.org/10.1177/0361198118758685

Horizontal curves are designed to provide a safe and smooth transition between straight segments on a highway network. Although curves are often designed to meet very stringent standards, imperfections during construction and high operating speeds mean that they are still prone to collisions. Therefore, it is essential that attributes of curves are surveyed to ensure they meet design requirements. Moreover, knowledge of the locations of horizontal curves and their attributes is also required to provide drivers with accurate information in advanced curve-warning systems, which are expected to enhance safety. Unfortunately, conventional techniques to obtain information about horizontal alignments are extremely tedious and, in some cases, impractical. This paper proposes a method by which horizontal curves can be automatically detected and their attributes automatically measured on scans of the highways obtained using light detection and ranging (LiDAR) technology. The proposed method is tested on two different highway segments at the Province of Alberta, Canada, where LiDAR data were collected. Moreover, testing was also conducted using virtual highways with curves with known attributes generated in AutoCAD Civil 3D. The results show that the code is successful in detecting all curves on a highway segment; moreover, the attributes of those curves were estimated with a high degree of accuracy (average difference <3%).

18-04619

English

pp 98-106

2018-12

Transportation Research Record: Journal of the Transportation Research Board

Print

Figures (6) ; References (19) ; Tables (1)

Curves (Geometry); Data collection; Detection and identification; Detection and identification technologies; Highway curves; Laser radar; Radius; Scanners

Data and Information Technology; Highways; Vehicles and Equipment

TRIS, TRB, ATRI

Dec 22 2017 10:38AM

• A Framework for Prioritizing Urban Arterial/Freeway Interchange Types using Multi-Criteria Analysis
• A Model of the Probability of a Cross-Median Crash When a Vehicle Fully Crosses the Median
• American Complete Streets and Australian SmartRoads: What Can We Learn from Each Other?
• Assessing Roadway Contributions to Stormwater Flows, Concentrations, and Loads with the StreamStats Application
• CFD-DEM Two-Way Coupled Numerical Simulation of Bridge Local Scour Behavior Under Clear-Water Conditions
• Development of a Standardized Buttress for Approach Guardrail Transitions
• Development of Transition between Free-Standing and Reduced-Deflection Portable Concrete Barriers
• Enhanced Design Guidelines for Interchange Loop Ramps
• Enhanced MASH TL-3 Short-Radius System: Promising Design to Accommodate Flat Terrain and Ditches
• Full-Scale Performance Evaluations of Various Wire-Backed Nonwoven Silt Fence Installation Configurations
• Highway Cross-Slope Measurement using Mobile LiDAR
• Human Personality Based Investigation on Distance Threshold for Freeway Landscape Pattern
• Identification and Calculation of Horizontal Curves for Low-Volume Roadways Using Smartphone Sensors
• Mitigation of Impacts to Groundwater Quality from Highway Runoff in a Karst Terrain
• Safety Evaluation of Geometric Design Criteria: Intersection Sight Distance at Unsignalized Intersections
• Safety Impact of Weaving Distance on Freeway Facilities with Managed Lanes using Both Microscopic Traffic and Driving Simulations