01593284

Component

https://doi.org/10.3141/2590-15

The Colorado Department of Transportation (DOT) recently concluded a study to adopt the AASHTO Mechanistic–Empirical Pavement Design Guide (MEPDG) and the accompanying software into its routine pavement design practice. Implementation of the MEPDG in Colorado required local calibration of the MEPDG prediction models for distress and smoothness. This paper presents a discussion of the calibration of the "global" rutting model to account for Colorado’s unique climate, traffic, and soil conditions as well as the various asphalt concrete (AC) mix types used in the state. A key challenge during the local calibration effort was to produce a rutting coefficient for each AC mix type: Marshall, Superpave®, and polymer-modified asphalt (PMA). Local calibration of the MEPDG global models by using Colorado DOT input data was performed with a nonlinear model optimization tool available in the SAS statistical software. Global model coefficients were adjusted through local calibration for AC rutting, unbound aggregate base rutting, and subgrade rutting. Four of the 10 model coefficients were adjusted. The local calibration coefficient βr1 turned out to be different for each of the three primary Colorado DOT ACs. As expected, of the three asphalt mixes, the PMA had the coefficient with the lowest value for βᵣ₁, and as a result this mix had the lowest AC rutting. The goodness of fit and bias test results indicated an adequate goodness of fit with minimal bias. This local calibration effort improved the overall prediction accuracy of the rutting model and its standard error.

01594377

16-6824

English

pp 132–141

2016

Transportation Research Record: Journal of the Transportation Research Board

9780309441285

Print

Figures (6) ; Maps; References (14) ; Tables (6)

Asphalt concrete; Calibration; Layer coefficient (Pavements); Mathematical models; Polymer asphalt; Rutting; Superpave

AASHTOWare (Software); Mechanistic-Empirical Pavement Design Guide

Local conditions; Marshall mixes

Colorado

Construction; Design; Highways; Pavements

PRP, TRIS, TRB, ATRI

Jan 12 2016 6:58PM

• Adaptation of NCHRP Project 1-41 Reflection Cracking Models for Semirigid Pavement Design in AASHTOWare Pavement ME Design
• Comparison of Fatigue Cracking Performance of Asphalt Pavements Predicted by Pavement ME and LVECD Programs
• Development and Validation of a Mechanistic–Empirical Design Method for Permeable Interlocking Concrete Pavement
• Effect of Early Opening to Traffic on Fatigue Damage to Concrete Pavement
• Effect of Wide-Base Tires on Nationwide Flexible Pavement Systems: Numerical Modeling
• Enhancing Rutting Prediction of the Mechanistic–Empirical Pavement Design Guide by Using Data from a Field Test Section in Oklahoma
• Evaluation of Structural Behavior of Precast Prestressed Concrete Pavement with Finite Element Analysis
• Impacts of Climatic Regions and Design Factors on the Condition and Distress of Specific Pavement Test Sections in the Long-Term Pavement Performance Program
• Laboratory and Field Evaluation of Florida Mixtures at the 2012 National Center for Asphalt Technology Pavement Test Track
• New Approach to Determining Concrete Slab Lift-Off by Use of Interfacial Fracture Mechanics Concepts
• Quantitative Assessment of the Effect of Wide-Base Tires on Pavement Response by Finite Element Analysis
• Research Implementation of AASHTOWare Pavement ME Design in Louisiana
• Time–Frequency Domain Analysis of Asphalt Longitudinal Strain
• Verification of Time–Temperature Superposition Principle for Shear Bond Failure of Interlayers in Asphalt Pavements