01590933

Component

https://doi.org/10.3141/2588-13

Cross-median crashes are among the most hazardous collision types on freeways. The primary countermeasure to reduce such crashes is the installation of a median barrier, with a cable barrier being a widely used alternative. As of 2014, approximately 317 mi of cable median barriers had been installed on freeways throughout Michigan. To assess the safety impacts of this installation program, a comprehensive before-and-after crash analysis was conducted; this analysis included a manual crash report review to identify all median-related crashes. Safety performance functions were developed for roadway segments before and after cable barrier installation, as well as for similar control segments where no barrier had been installed. The empirical Bayes (EB) method was used to develop crash modification factors as a function of median width. To explore the effects of regression to the mean (RTM), the EB results were compared with those from a naïve before–after analysis. The results showed that cable barriers significantly reduced the frequency of fatal and severe injury crashes, although substantial increases in less severe crashes were also observed. The cable barrier was found to have greater impacts on crashes across nearly all severity levels when used on narrow medians (i.e., 26 to 50 ft) compared with wider medians (50 to 94 ft). In addition, reductions in fatal and serious injuries were less pronounced when compared with prior research (especially for wider medians), which was largely attributed to RTM effects. Ultimately, this study provides important guidance to deal with the expected safety impacts (and related costs) associated with cable median barrier installation.

01590546

16-2430

English

pp 116–125

2016

Transportation Research Record: Journal of the Transportation Research Board

9780309369794

Print

Figures (3) ; Maps; References (26) ; Tables (4)

Before and after studies; Cables; Crash analysis; Crash modification factors; Highway safety; Median barriers; Safety engineering

Michigan

Design; Highways; Safety and Human Factors

PRP, TRIS, TRB, ATRI

Jan 12 2016 5:04PM

• Calibration and Validation of a Shared Space Model: Case Study
• Development of an 1100C Crushable Nose Surrogate Vehicle for Low-Speed Impact Testing of Breakaway Hardware
• Effects of Cross-Slope Break on Roadway Departure Recovery for Trucks on Horizontal Curves
• Estimating the Safety Effects of Intersection Sight Distance at Unsignalized Intersections
• Impact of Vegetation Management on Vegetated Roadsides and Their Performance as a Low-Impact Development Practice for Linear Transportation Infrastructure
• Implementing a Successful Risk-Based, Data-Driven Scour Program
• Innovations in Accommodation of Longitudinal Utility Installations Along Controlled-Access Highways
• Manual for Assessing Safety Hardware Test Level 4 Design and Evaluation of a Restorable Energy-Absorbing Concrete Barrier
• Operational and Safety Trade-Offs: Reducing Freeway Lane and Shoulder Width to Permit an Additional Lane
• Pedestrian Crossing Sight Distance: Lateral Clearance Guidelines for Roadways
• Performance Evaluation of a Cable Median Barrier System on an Oregon Highway with a Narrow Median
• Recommendations for Acceleration Lane Length for Metered On-Ramps
• Relationship Between Geometric Design Features and Performance
• Reliability-Based Design of Horizontal Curves on Two-Lane Rural Highways
• Tree Planting and Clearing Guidance with Consideration of Minimized Crash Risk
• Upper Bound of Abutment Scour in Laboratory and Field Data
• Upper Bound of Pier Scour in Laboratory and Field Data
• Use of Side Friction in Horizontal Curve Design: A Margin of Safety Assessment