01571475

Component

https://doi.org/10.3141/2472-14

Many researchers have proved that one of the parameters that most influence safe driving is operating speed, defined as the speed at which drivers travel on a dry road in free-flow conditions during daylight hours. This study describes a comparison between driver speed behavior on horizontal circular curves located in Serbia and on circular curves located in Italy with analogous infrastructural–geometric contexts. Only curves within a two-lane rural road network in low-volume conditions without spiral transition curves were studied. Operating speed profiles were plotted, and a careful analysis was carried out to study the deceleration and acceleration motion at each selected curve. Speed measurements were conducted by using different devices: (a) for the Italian case, laser detectors were used that emit and receive a pair of laser beams perpendicular to the road’s axis and record the instantaneous vehicle speed and (b) for the Serbian case, sensors were used with an application software developed in the LabVIEW programming environment, and signals were logged in a binary file for which the vehicle speed was measured on the basis of the passing time between two consecutive sensors along the curve. Two types of driver behavior were found: (a) deceleration when approaching the middle of the curve and acceleration leaving it and (b) deceleration over the whole circular curve length. A t-test was performed. Statistically, no significant difference was produced from the analysis when circular curves were located in different states that reflected the same geometric, traffic, and environmental context.

01567119

English

pp 117-128

2015

Transportation Research Record: Journal of the Transportation Research Board

9780309295710

Print

Figures; Photos; References; Tables

Behavior; Drivers; Highway curves; Highway safety; Low volume roads; Rural highways; Speed; Two lane highways

Italy; Serbia

Highways; Safety and Human Factors; I83: Accidents and the Human Factor

TRIS, TRB, ATRI

Jun 24 2015 9:24AM

• Automated Extraction of Horizontal Curve Information for Low-Volume Roads
• Best Management Practices for Low-Volume Forest Roads in the Piedmont Region: Summary and Implications of Research
• Can Traffic Signs Be Too Bright on Low-Volume Roads?
• Cost-Effective Safety Treatment of Trees on Low-Volume Rural Roads
• Decision Tree–Based Method for Safety Treatment Selection at Intersections Involving Shared-Use Low-Volume Roads
• Driving Behavior of Sleep Apnea Subjects and Measures of Green Travel on Low-Volume Roads
• Dust Control Products at Hagerman National Wildlife Refuge, Texas: Environmental Safety and Performance
• Effect of Painted Shoulders on Vehicle Speed
• Environmentally Optimized Design for Low-Volume District Roads in Tanzania
• Establishing Speed Limits on Unpaved Roads: Methodology and Case Study
• Identifying Low-Volume Road Segments with High Frequencies of Severe Crashes
• Implementation of Wyoming Rural Road Safety Program
• Inexpensive Retroreflectivity Field Inspection Kit
• Low-Cost Measures for Reducing Speeds at Curves on Two-Lane Rural Highways
• Modeling Driver Behavior by Using the Speed Environment for Two-Lane Rural Roads
• Optimization of Farm-to-Market Road Investment and Maintenance Activities in Selected Developing Countries
• Overview of Amazon Basin Forest Roads Manual
• Physics Models for Vehicle Crush During Frontal Fixed-Barrier Impacts
• Safety Evaluations for Skewed Intersections on Low-Volume Roads
• Safety Inspection and Management Tools for Low-Volume Road Network
• Simple Empirical Guide to Pavement Design of Low-Volume Roads in Indiana
• Strategic Safety Management Plan for Wind River Indian Reservation
• Toward Sustainable Management of Low-Volume Roads in Chile: Improvements and Challenges
• Updating Side Friction Factors for Design of Unpaved Roads
• Worst-Case Connection Strength Considerations in Designing Certification Crash Test Experiments for W-Beam Guardrail