01472353

Component

https://doi.org/10.3141/2304-16

http://scholar.google.com...sari&publication_year=2012

Nondestructive testing provides key information about the structural integrity and the capacity of in-service pavements. The rolling wheel deflectometer (RWD) was introduced to support existing nondestructive testing techniques by providing a screening tool for structurally deficient pavements at the network level. The objective of this study was to develop and validate a direct and simple model for determining the pavement structural number (SN) by using RWD deflection data. To achieve this objective, the relationship between the average RWD surface deflection and the peak falling weight deflectometer (FWD) deflection was investigated. The developed model correlated pavement SN with three RWD-measured properties: average and standard deviation of RWD deflection and RWD index. The developed model was fitted to RWD data collected in 16 road sections (each 1.5 mi long), referred to as research sites, in Louisiana. The model was then validated on the basis of data from the FWD and RWD collected on 52 road sections in Louisiana. Results showed agreement between SN calculations obtained from FWD and those from RWD deflection testing. Although the developed model is independent of pavement thickness and layer properties, it provides promising results as an indicator of pavement structural integrity at the network level. The fitting statistics support the use of the proposed model as a screening tool for identifying structurally deficient pavements at the network level.

01471223

12-1798

English

pp 142-149

2012

Transportation Research Record: Journal of the Transportation Research Board

9780309263030

Print

Figures; References; Tables

Deflection tests; Falling weight deflectometers; Mathematical models; Nondestructive tests; Pavement structural numbers; Pavements

Rolling wheel deflectometers

Louisiana

Highways; Pavements; I23: Properties of Road Surfaces

TRIS, TRB, ATRI

Feb 15 2013 8:27AM

• Accounting for Material-Specific Inflation Rates in Life-Cycle Cost Analysis for Pavement Type Selection
• Application of Texture Analysis and Kohonen Map for Region Segmentation of Pavement Images for Crack Detection
• Approximation Approach to Problem of Large-Scale Pavement Maintenance and Rehabilitation
• Cracking and Rutting Performance of Composite Pavements Under Testing with Heavy Vehicle Simulator: Rubberized Hot-Mix Asphalt with Gap-Graded Aggregates over Portland Cement Concrete
• Developing Pavement Performance Models for Delaware
• Evaluation of Asphalt Damage and Cracking Development with Seismic Pavement Analyzer
• Evaluation of Traffic-Speed Deflectometers
• Evolution of Asphalt Mixture Stiffness Under Combined Effects of Damage, Aging, and Densification Under Traffic
• Field Application of Ground-Penetrating Radar for Measurement of Asphalt Mixture Density: Case Study of Illinois Route 72 Overlay
• Impact of Wide-Base Tires on Pavements: Results from Instrumentation Measurements and Modeling Analysis
• Implementation of Network-Level Falling Weight Deflectometer Survey
• Impulse Response Dynamic Stiffness Decay in Aging General Aviation Airfield Pavements
• Modeling Pavement Conditions of Multilane Roads with Measured Driving Lane Data
• Probe Vehicles Used to Measure Road Ride Quality: Pilot Demonstration
• Procedure for Optimum Pavement Deflection Test Spacings for Network-Level Applications
• Realistic Life-Cycle Cost Analysis with Typical Sequential Patterns of Pavement Treatment Through Association Analysis
• Relating Ride Quality and Structural Adequacy for Pavement Rehabilitation and Management Decisions
• Rutting of Rubberized Gap-Graded and Polymer-Modified Dense-Graded Asphalt Overlays in Composite Pavements
• Sustainability of Perpetual Pavement Designs: Canadian Perspective
• Use of Falling Weight Deflectometer Data for Network-Level Flexible Pavement Management
• Wavelet-Based Detection of Roughness Progression in Wavebands for Highways in Victoria, Australia