01474125

Component

https://doi.org/10.3141/2349-10

http://scholar.google.com...Edil&publication_year=2013

There is an increasing trend toward using recycled concrete aggregate (RCA) in construction. However, concerns have been expressed in laboratory studies about the highly alkaline leachate, high-pH leaching patterns, and release of heavy metals from RCA (e.g., chromium, lead, and arsenic). In this study, RCA materials from a wide geographical area were investigated. Physical, chemical, and mineralogical properties were characterized and laboratory column leaching tests were conducted. Two field test sites were installed and instrumented, one at the Minnesota Road Research (MnROAD) facility in Minnesota and a second at a surface parking facility at the University of Wisconsin–Madison. The MnROAD site showed a neutral leachate pH (between 6.5 and 8.0) after 7 months of service life [1.2 pore volumes of flow (PVFs)]; however, the pH from column leaching tests ranged between 11.0 and 12.5 and showed no decline over 100 PVFs. Because of the large difference between the field and laboratory results, two samples of RCA in Wisconsin, one from a recent demolition of concrete pavement (WR-F) and the other from an RCA stockpile with an age of 5 to 10 years (WR-SP), were used in the Wisconsin field site to verify the Minnesota data and investigate the long-term leaching of alkaline compounds and heavy metals. WR-F RCA started with a high leachate pH (12.6) and remained constant for the first 5 PVFs; however, WR-SP RCA started at a lower pH (7.3) but showed a gradually increasing trend, up to pH = 11.9 for the first 2 PVFs. The pHs from both RCAs were higher than the U.S. Environmental Protection Agency drinking water standard. Arsenic, chromium, lead, and selenium in the RCA field leachate were observed to be higher than the maximum contaminant level for the U.S. drinking water standard.

01495199

13-2412

English

pp 81-90

2013

Transportation Research Record: Journal of the Transportation Research Board

9780309263443

Print

Figures (8) ; References (24)

Alkali; Base course (Pavements); Concrete aggregates; Field tests; Heavy metals; Leachate; Leaching; pH value; Recycled materials

Minnesota; Wisconsin

Environment; Geotechnology; Highways; Materials; Pavements; I15: Environment; I36: Aggregates

PRP, TRIS, TRB, ATRI

Feb 5 2013 12:31PM

• Characterization of Moisture-Dependent Changes in Stiffness of Unbound Aggregate Base Materials in Florida
• Corridor Management: A Means to Elevate Understanding of Geotechnical Impacts on System Performance
• Effect of Temperature on Shear Strength of Recycled Asphalt Shingles
• Examining Effects of Climatic Factors on Flexible Pavement Performance and Service Life
• Influence of Contact Angle on Soil–Water Characteristic Curve with Modified Capillary Rise Method
• Integrating National Database of Subgrade Soil–Water Characteristic Curves and Soil Index Properties with Mechanistic–Empirical Pavement Design Guide
• Leaching Behavior of Aluminum, Arsenic, and Chromium from Highway Structural Fills Amended with High-Carbon Fly Ash
• Need for Effective Technology Transfer to Ensure Sustainability of Otta Seal: Example from Botswana
• Otta Seal Surfacing: Practical and Economic Alternative to Traditional Bituminous Surface Treatments
• Overcoming an Environmental Surprise with Innovative, Fast-Track Technology: Case History Along I-69 Through Tennessee
• Physically Based Equation for Phase Composition Curve of Frozen Soils
• Safety Data Analysis to Evaluate Highway Alignment Consistency
• Structural Pattern Effects on Engineering Behavior of Hexagonal Wire Mesh Gabion Panels
• Thermally Induced Water Flux in Soils
• Validating Spring Weight Restriction Limits with Mechanistic–Empirical Failure Prediction Models: Low-Volume Roads in Manitoba, Canada