01365778

Component

https://doi.org/10.3141/2292-14

http://scholar.google.com...nski&publication_year=2012

Accurate assessment of the condition of concrete bridge decks leads to a bridge management system that is mechanistic and reliable, qualities of great importance to transportation agencies. In this study, two sonic–seismic methods—impact echo (IE) and ultrasonic surface waves (USW)—were used to characterize material properties and to identify fabricated delaminated areas inside a concrete bridge deck. The reliability of IE and USW is affected not only by the strengths and weaknesses of these methods but also by the ways in which data are collected, interpreted, and presented. The data obtained from the two methods were visualized in both traditional and checkerboard formats. The checkerboard format located the delaminated areas more precisely because the smoothing algorithm was avoided in this contouring method. This observation is more critical as the density of data collection is reduced. The evaluative power of each method and the power in combination, were also compared and discussed in terms of detectability and accuracy. The combined results from USW and IE were preferred to the individual results of each method because the combined results provided redundant and complementary data that reduced uncertainty in the identification of defects with no added overhead for field data collection. A relationship between the size of the defect and measurement density was recommended through evaluation of the bridge deck at three measurement densities. The measurement spacing should be equal to or less than the smallest defect deemed critical by the owner agency.

01455587

12-4083

English

pp 113–124

2012

Transportation Research Record: Journal of the Transportation Research Board

9780309223331

Print

Figures; Photos; References; Tables

Bridge decks; Condition surveys; Data collection; Defects; Delamination; Ultrasonic tests

Impact echo tests

Ultrasonic surface waves

Bridges and other structures; Highways; Maintenance and Preservation; I61: Equipment and Maintenance Methods

TRIS, TRB, ATRI

Feb 8 2012 5:21PM

• Best-Value Bid Selection Methods for Performance-Based Roadway Maintenance Contracts
• Comprehensive Model for Highway Bridge Maintenance Quality Evaluation in Jiangsu Province, China
• Criteria for Fleet Management: Identification of Optimal Disposal Points with the Use of Equivalent Uniform Annual Cost
• Framework for Carbon Emission Evaluation of Road Maintenance
• Impact of Climate Conditions on Effectiveness of Asphalt Pavement Preservation Techniques
• Impact of Three State Practices on Effectiveness of Hot-Mix Asphalt Overlay
• Increased Maintenance Costs of Extreme Weather Events: Preparing for Climate Change Adaptation
• Integration of Life-Cycle Cost Analysis with Bridge Management Systems: Case Study of Swedish Bridge and Tunnel Management System
• Life Cycle of Hot In-Place Pavement Recycling: Case Study
• Long-Term Field Monitoring and Evaluation of Maintenance Practices for Pervious Concrete Pavement in Vermont
• Measurement and Communication of Bridge Performance with Remote Sensing Technologies
• On the Road to Sustainability: Properties of Hot In-Place Recycled Superpave Mix
• Optimal Allocation of Resources to Maintain, Rehabilitate, and Reconstruct Heterogeneous Bridge Networks
• Optimization of Equipment Replacement: Dynamic Programming-Based Optimization
• Pavement Preservation with Micromilling in Georgia: Follow-Up Study
• Probabilistic Approach to Life-Cycle Cost Analysis of Preventive Maintenance Strategies on Flexible Pavements
• Project Selection and Prioritization of Pavement Preservation: Competitive Approach
• Repair of Construction-Related Deterioration in Precast Deck-Panel Bridges
• Stochastic Life-Cycle Cost Analysis for Pavement Preservation Treatments