01358794

Component

https://doi.org/10.3141/2227-16

http://scholar.google.com...rtin&publication_year=2011

Pavement surface friction influences traffic accident rates, especially during wet weather, and is affected by pavement surface texture as characterized by microtexture and macrotexture. This study investigated the utility of measuring pavement surface macrotexture in the laboratory by using the aggregate image measurement system (AIMS) on cores extracted from pavement sections. Texture measurements made in the laboratory with AIMS were compared with texture measurements made on the pavement with the circular track meter (CTMeter). Previous research established a strong correlation between the mean profile depth (MPD) from the CTMeter, which considered averages of maximum heights, and the mean texture depth from the sand patch test, a volumetric method that was the accepted standard for macrotexture measurement. Similarly, in this study, statistical analysis showed a good correlation between the MPD values from AIMS measurements on pavement cores, based on analysis with 50-mm (2-in.) scan line segment lengths, and the MPD measured on the pavement in the field with the CTMeter. Further analysis using root-mean-square (RMS) values that considered all height measurements showed that the proposed procedure with AIMS was sensitive to the direction of the texture measurement scans and could therefore distinguish traffic direction across the core. The mean RMS values from AIMS also had a fairly strong relationship with the MPD values measured on the pavement by the CTMeter. Finally, the results indicated that a set of three directional scan lines could be used on the cores instead of four directional scan lines and the conclusions were still valid.

01358795

11-1335

English

pp 146-152

2011

Transportation Research Record: Journal of the Transportation Research Board

9780309167505

Print

Figures (10) ; Photos (4) ; References (14)

Core samples; Laboratory tests; Macrotexture; Measuring methods; Pavements

Imaging systems

Circular track meter; Mean profile depth

Highways; Pavements; I23: Properties of Road Surfaces

TRIS, TRB, ATRI

Dec 12 2011 2:45PM

• Backcalculation Models to Evaluate Light Falling Weight Deflectometer Moduli of Road Foundation Layer Made with Bottom Ash Waste
• Backcalculation of Dynamic Modulus Mastercurve from Falling Weight Deflectometer Surface Deflections
• Contribution of Hysteresis Component of Tire Rubber Friction on Stone Surfaces
• Data Processing and Analysis Software for Continuous Friction Measurement Equipment
• Development of NYSLAB: Improved Analysis Tool for Jointed Pavement
• Evaluation of Factors Affecting Long-Term Performance of Cold In-Place Recycled Pavements in New York State
• Evaluation of Near-Surface Stress States in Asphalt Concrete Pavement: Three-Dimensional Tire–Pavement Contact Model
• Evaluation of Pavement System Based on Ground-Penetrating Radar Full-Waveform Simulation
• Evaluation of Selected Effects of Pavement Riding Quality on Logistics Costs in South Africa
• Field Evaluation and Cost-Effectiveness of Saw and Seal Method to Control Reflection Cracking in Composite Pavements
• Life-Cycle Environmental Analysis for Evaluation of Pavement Rehabilitation Options
• Mechanistic–Empirical Evaluation of Aggregate Base and Granular Subbase Quality Affecting Flexible Pavement Performance in Minnesota
• New Mechanistic–Empirical Approach for Estimating the Effect of Roughness on Vehicle Durability
• Numerical Investigation of Response of Widened Pavement System
• Revised Methodology for Computing International Friction Index
• Ride Specifications: Virginia’s Experience, Accomplishments, and Challenges
• Sand Mix Interlayer to Control Reflective Cracking in Hot-Mix Asphalt Overlay
• Selection of Pavement for Highway Rehabilitation Based on Life-Cycle Cost Analysis: Validation of California Interstate 710 Project, Phase 1
• System for Measuring Splash on Wet Pavements
• Validation of Backcalculated Modulus Values from Falling Weight Deflectometer Through Instrumentation on I-35 in Oklahoma