01049594

Component

https://doi.org/10.3141/2030-06

http://scholar.google.com...kins&publication_year=2007

The guidelines for minimum visibility distance in the 2003 "Manual on Uniform Traffic Control Devices" (MUTCD) are based on a research model developed in 1977, a portion of which was based on stopping sight distance concepts from 1965. Since then, roadway design criteria, vehicle performance characteristics, and driver characteristics have changed. These changes provide justification for reevaluating the guidelines for minimum signal sight distance. This paper identifies the basis for the current guidelines (which were not published) and develops updated guidelines for signal sight distance. As with the original guidelines, the updated guidelines are based on a theoretical model that addresses reaction time, braking distance, and queue length. The key changes incorporated into the updated model are calculating the stopping distance on the basis of deceleration rates, using a reaction time consistent with the AASHTO stopping sight distance, and eliminating the provision for a vehicle queue at the stop line, as the driver should be able to respond to the queue on the basis of the stopping sight distance provided by the road. The updated values for minimum signal sight distance are typically 20% to 25% less than those currently in the MUTCD. The lack of guidance in the MUTCD about placement of the “Signal Ahead” sign is also pointed out, and it is suggested that it be located on the basis of the signal sight distance and not according to warning sign placement guidelines.

01089673

English

pp 40-46

2007

Transportation Research Record: Journal of the Transportation Research Board

9780309104579

Print

Figures (1) ; References (13) ; Tables (5)

Braking performance; Guidelines; Highway operations; Reaction time; Sight distance; Stopping sight distance; Traffic signals; Visibility distance; Warning signs

Manual on Uniform Traffic Control Devices

Deceleration rates; Queue length

Highways; Operations and Traffic Management; I73: Traffic Control

TRIS, TRB, ATRI

Feb 8 2007 7:20PM

• Analysis of Driver Behavior in Dilemma Zones at Signalized Intersections
• Developing Design Standards for Speed Cushions
• Development of Crash Reduction Factors for Overhead Flashing Beacons at Rural Intersections In North Carolina
• Factors That Influence the Effectiveness of Rumble Strip Design
• Preferences for Headlight Swivel Angles at Curves on Rural Two-Lane Highways
• Reducing Undesirable Actions of Motor Vehicle Drivers at Railroad-Highway Grade Crossings
• Traffic Control Devices and Barrier Systems at Grade Crossings: Literature Review
• Urban Wayfinding Signs: Evaluating Exceptions to FHWA’s Standard Alphabets
• US-36 Environmental Impact Statement and Basic Engineering: Methodology of Grade Crossing Evaluation
• Warranting Traffic Signals on the Basis of Proximity of Railroad Grade Crossings