00931976

Component

https://doi.org/10.3141/1789-18

http://scholar.google.com...uist&publication_year=2002

The digital image correlation (DIC) method, a noncontact, full-field displacement measurement technique, has been applied to mechanical testing of asphalt concrete. A single couple charged device camera acquires images of an area of interest from a specimen in the undeformed and deformed states. These images are correlated to determine deformations, and advanced mathematical procedures are applied to these deformations to calculate strains. To verify the DIC measurements, vertical displacements for the middle and bottom sections of a specimen subjected to monotonic tension are compared with conventional linear variable differential transformer measurements. A series of DIC images captured during the monotonic and cyclic tests visualizes the evolution of the failure zone (i.e., the fracture process zone) at the crack tip. Also, it is demonstrated that the full-field measurement and post-processing nature of DIC allows a more accurate determination of the stress-strain behavior of the fracture process zone. The applicability of this method to a cylindrical specimen with a curved surface is also investigated by testing a 75-mm-diameter cylindrical specimen. Finally, the DIC method is extended to cyclic testing of asphalt mixtures with the aid of a synchronized image acquisition technique.

This paper appears in Transportation Research Record No. 1789, Bituminous Paving Mixtures 2002.

English

p. 162-172

2002

Transportation Research Record

0309077141

Figures (10) ; Photos (1) ; References (8)

Accuracy; Asphalt concrete; Asphalt mixtures; Cyclic tests; Deformation; Deformation curve; Mathematical analysis; Mechanical tests; Strain (Mechanics)

Cylindrical specimens; Digital image correlation; Fracture process zone; Synchronized image acquisition

Highways; Materials; I31: Bituminous Binders and Materials

TRIS, TRB, ATRI

Oct 4 2002 12:00AM

• AGGREGATE BLENDING FOR ASPHALT MIX DESIGN: BAILEY METHOD
• COARSE- VERSUS FINE-GRADED SUPERPAVE MIXTURES: COMPARATIVE EVALUATION OF RESISTANCE TO RUTTING
• COMPARISON OF FUNDAMENTAL AND SIMULATIVE TEST METHODS FOR EVALUATING PERMANENT DEFORMATION OF HOT-MIX ASPHALT
• DETERMINING THE LOW-TEMPERATURE FRACTURE TOUGHNESS OF ASPHALT MIXTURES
• DYNAMIC MODULUS OF ASPHALT CONCRETE WITH A HOLLOW CYLINDER TENSILE TESTER
• EFFECT OF AGGREGATE STRUCTURE ON RUTTING POTENTIAL OF DENSE-GRADED ASPHALT MIXTURES
• EFFECT OF FINE AGGREGATE ANGULARITY ON COMPACTION AND SHEARING RESISTANCE OF ASPHALT MIXTURES
• EVALUATION OF FATIGUE HEALING EFFECT OF ASPHALT CONCRETE BY PSEUDOSTIFFNESS
• EVALUATION OF MEASUREMENT TECHNIQUES FOR ASPHALT PAVEMENT DENSITY AND PERMEABILITY
• HISTORY AND FUTURE CHALLENGES OF GYRATORY COMPACTION: 1939 TO 2001
• INFLUENCE OF ASPHALT TACK COAT MATERIALS ON INTERFACE SHEAR STRENGTH
• LOUISIANA EXPERIENCE WITH CRUMB RUBBER-MODIFIED HOT-MIX ASPHALT PAVEMENT
• MICROMECHANICAL ANALYSIS OF VISCOELASTIC PROPERTIES OF ASPHALT CONCRETES
• PREDICTING VISCOELASTIC RESPONSE AND CRACK GROWTH IN ASPHALT MIXTURES WITH THE BOUNDARY ELEMENT METHOD
• ROUND-ROBIN STUDY FOR FIELD PERMEABILITY TEST
• RUNOFF CONTROL IN POROUS PAVEMENTS
• SHEAR PROPERTIES AS VIABLE MEASURES FOR CHARACTERIZATION OF PERMANENT DEFORMATION OF ASPHALT CONCRETE MIXTURES
• SIMPLE PERFORMANCE TEST FOR FATIGUE CRACKING AND VALIDATION WITH WESTRACK MIXTURES
• STANDARDIZED PROCEDURE FOR ANALYSIS OF DYNAMIC MODULUS \E*\ DATA TO PREDICT ASPHALT PAVEMENT DISTRESSES
• TARGET AND TOLERANCE STUDY FOR ANGLE OF GYRATION USED IN SUPERPAVE GYRATORY COMPACTOR
• TIME-TEMPERATURE SUPERPOSITION FOR ASPHALT CONCRETE AT LARGE COMPRESSIVE STRAINS
• TOWARD A MICROMECHANICS-BASED PROCEDURE TO CHARACTERIZE FATIGUE PERFORMANCE OF ASPHALT CONCRETE
• USE OF STIFFNESS OF HOT-MIX ASPHALT AS A SIMPLE PERFORMANCE TEST