01648168

Component

https://doi.org/10.3141/2630-15

A thin hot-mix asphalt (HMA) level binder (LB) course or interlayer has been used for decades in Illinois. Originally, the LB was simply a layer to provide a working platform that corrected minor variations in the profile of the pavement before HMA overlay. The performance of LB has become of increasing concern with respect to whether high asphalt binder replacement (ABR) could be incorporated into the LB mixes to reduce costs by adding reclaimed asphalt pavement (RAP) and recycled asphalt shingles (RAS). This study investigated three LB courses with varying ABRs and sources that had been used in five field HMA overlay rehabilitation projects in Illinois. The performances were characterized by a comprehensive testing suite that consisted of tests for dynamic modulus, rutting (flow number and Hamburg wheel tracking tests), moisture susceptibility (tensile strength ratio), fracture resistance [Illinois Flexibility Index Test (I-FIT) overlay tester, and four-point beam fatigue]. The role that these LB mixes play in HMA overlay performance also was examined in field performance. It was found that the rutting and the moisture resistance performances were good for all mixes. Three cracking performance tests showed a consistent trend that higher use of ABR in LB mixes resulted in worse cracking resistance. On the basis of the field performance, I-FIT is recommended as a simple performance test to evaluate the cracking resistance of LB mixes with high ABRs, given its testing simplicity, reliability, and ease of specimen preparation. The LB mixes with the best cracking resistance exhibited the least amount of transverse cracking. The addition of RAP and RAS to an LB course must be reexamined without jeopardy to the main purpose for the use of LB and without a negative impact on its performance.

01634656

17-03707

English

pp 118-127

2017

Transportation Research Record: Journal of the Transportation Research Board

9780309441841

Digital/other

Figures; References; Tables

Bituminous binders; Hot mix asphalt; Pavement cracking; Properties of materials; Reclaimed asphalt pavements; Recycled materials

Highways; Materials; Pavements

TRIS, TRB, ATRI

Oct 5 2017 11:28AM

• Assessment of State Agencies’ Practices in Managing Geotechnical Risk in Design–Build Projects
• Comparison of Qualifications-Based Selection and Best-Value Procurement for Construction Manager–General Contractor Highway Construction
• Density Observations from a Full-Scale, Untrafficked Test Section with Guidance for Dryback Methods
• Economic Impact Analysis of Bridge Construction
• Estimating Earthwork Volumes Through Use of Unmanned Aerial Systems
• Evaluation of Stainless Steel Fasteners for Bolted Field Splice Connections of ASTM A1010 Corrosion-Resistant Steel Plate Girders
• Exploration of Early Work Packaging in Construction Manager–General Contractor Highway Projects
• Factors Related to the Appearance of Transverse Bumps in Asphalt Overlays Placed over Crack Sealant
• Field and Laboratory Properties of Roller-Compacted Concrete Pavements
• Framework for Objectively Determining Best Practices for Alternative Contracting Methods
• Highly Modified Asphalt Binder for Asphalt Crack Relief Mix
• Impact of Alternative Project Delivery Systems on the International Roughness Index: Case Studies of Transportation Projects in the Western United States
• Monitoring During Lateral Bridge Slide
• New Quality Assurance Tests for Building Quality Concrete Pavement
• Project Scoping Process Model Development to Achieve On-Time and On-Budget Delivery of Highway Projects
• Roles and Responsibilities of Independent Cost Estimator in Construction Manager–General Contractor Highway Construction
• Wisconsin Department of Transportation Hot-Mix Asphalt Round Robin Laboratory Qualification Testing Program