01624791

Component

https://doi.org/10.3141/2655-10

Soil moisture content and dry density of unbound granular pavement materials are important properties for compaction control that influence pavement performance under cyclic loading. Under these loading conditions, increasing moisture content can accelerate significant changes in density. Time domain reflectometry (TDR) is a method for measuring the moisture content and density of soils with rod probe sensors. This paper introduces new calibration functions for TDR measurements using these rod probe sensors embedded in the soil. TDR measurements were taken in the laboratory for a typical road base material at two basically different conditions: at constant moisture content with different dry densities and at constant dry density with different moisture contents. In this study, a relationship was developed between the voltage drop occurring for the passage of an electromagnetic wave through the soil and the bulk density. The permittivity of the soil sample obtained from the travel time of TDR signals was used to calculate the volumetric moisture content. Finally, the gravimetric moisture content was obtained from the volumetric moisture content and bulk density relationship. For the validation of the calibration functions, rod probe sensors were installed in a road to obtain in situ moisture content and density under field conditions. Laboratory results indicate that the calibration functions are independent of moisture and density, and the field test shows the applicability of the method. The newly developed calibration functions allow for the monitoring of the long-term pavement performance, leading to a better understanding of the time-dependent evolution of, for example, rutting of roads.

01629558

17-03919

English

pp 71–81

2017

Transportation Research Record: Journal of the Transportation Research Board

9780309441568

Digital/other

Figures (9) ; Photos; References (20) ; Tables (2)

Calibration; Density; Moisture content; Pavement performance; Time domain reflectometers

Unbound granular materials

Geotechnology; Highways; Materials; Pavements

PRP, TRIS, TRB, ATRI

Dec 8 2016 11:30AM

• Case Study on the Use of Mobile Lidar to Produce a Preliminary Drainage Design
• Ethylene Glycol Accelerated Weathering Test: An Improved, Objective Aggregate Durability Test Method
• Evaluating Constructed Aggregate Layers of Working Platforms and Flexible Pavements: Adequacy of In-Place Quality Control and Quality Assurance Techniques
• Influence of Maximum Particle Size, Fines Content, and Dust Ratio on the Behavior of Base and Subbase Coarse Aggregates
• Permanent Strain Behavior of Marginal Granular Material
• Results of Soaked and Unsoaked California Bearing Rate Tests on Unbound Aggregates with Varying Amounts of Fines and Dust Ratios
• Shear Wave Velocity Profiles of Roadway Substructures from Multichannel Analysis of Surface Waves and Waveform Tomography
• Strain Rate Effect on Shear Behavior of Open-Graded Aggregates
• Vibratory Compaction of Base Course Aggregates