01591957

Component

https://doi.org/10.3141/2551-13

Icy roads in wintertime present a hazard for road users. It is therefore desirable to maintain bare roads. To achieve this, deicing chemicals are typically applied. One important property of the chemicals that are used is how fast they can melt ice. Understanding what affects the melting rate, however, is limited. An experiment was therefore designed to study how the driving force for the melting—the chemical potential difference between ice and solution—affects the chemical melting rate of ice. In this study, the driving force was represented by the solution freezing points. The experiment was performed at –5°C (23°F) by using the solutions of four chemicals: sodium chloride, magnesium chloride, and calcium chloride, as well as potassium formate. These four solutions were mixed to have four freezing points. They were –10°C (14°F), –18°C (–0.4°F), –30°C (–22°F); and the eutectic temperature of each chemical. The results showed that there was a clear correlation between solution freezing point and how fast the solution could melt ice. The solutions with the lowest freezing point melted ice four to five times faster than the solutions with the highest freezing point. The importance of solution freezing point was attributed to its direct relation to the solution chemical potential, with a low freezing point giving a large driving force for the phase change. In addition, it was found that the type of chemical plays a role on the melting rate of ice. The fastest melting chemical (potassium formate) melted ice 45% faster than the slowest melting chemical (magnesium chloride), which is attributed to potassium formate having a higher ion mobility. A higher ion mobility allows a faster transport of solute to the ice–solution interface.

01594661

16-1151

English

pp 111–117

2016

Transportation Research Record: Journal of the Transportation Research Board

9780309441230

Print

Figures (3) ; References (35) ; Tables (2)

Chlorides; Deicing; Deicing chemicals; Freezing point; Melting; Potassium; Winter maintenance

Highways; Maintenance and Preservation; Operations and Traffic Management

TRIS, TRB, ATRI

Jan 12 2016 4:31PM

• Accuracy of Ice Melting Capacity Tests: Review of Melting Data for Sodium Chloride
• Assessing Driver Speed Choice in Fog with the Use of Visibility Data from Road Weather Information Systems
• Connected Vehicle Solution for Winter Road Surface Condition Monitoring
• Design and Performance Monitoring of Snow-Supporting Structures for the Milepost 151 Avalanche near Jackson, Wyoming
• Development of a Sensor Platform for High-Accuracy Mapping of Roadway Lane Markings
• Energy-Regenerative Shock Absorber for Transportation Vehicles Based on Dual Overrunning Clutches: Design, Modeling, and Simulation
• Expanding the Road Weather Information System for Avalanche Support
• Fire Risk Assessment for Highway Bridges in South Korea
• Modeling Effects of Precipitation on Vehicle Speed: Floating Car Data Approach
• Optimizing Environmental Sensor Station Locations for Road Weather Management: Overview and a Generalized Modeling Framework
• Piecewise Multiple Linear Models for Pavement Marking Retroreflectivity Prediction Under Effect of Winter Weather Events
• Proactive Strategy for Variable Speed Limit Operations on Freeways Under Foggy Weather Conditions
• Statistical Analysis for Assessing Highway Maintenance Level of Service
• Superhydrophobic Coatings on Asphalt Concrete Surfaces: Toward Smart Solutions for Winter Pavement Maintenance
• Use of Social Media by Transportation Agencies for Traffic Management