01596038

Component

https://doi.org/10.3141/2545-01

Insulated rail joints are used for signal control and detection of broken rails in railway operations. Bonded insulated rail joints are the standard in freight railroads with heavy axle loads. While there have been many numerical and experimental studies investigating the mechanics of insulated rail joints, mechanisms to understand the impact failure of insulated rail joints require further attention. This study presents a dynamic finite element model designed to simulate the mechanics of an insulated rail joint starting from a wheel–rail contact interface to stresses and deflections at any point under the wheel loads at speeds up to 60 mph. Track configuration and product design options were chosen as input variables for the model. The selection of these variables was driven by the need to answer track engineers’ questions about supporting versus suspending joints on wood or concrete ties and responses of different design options to different track configurations. Results show that contact stresses did not change significantly as a result of track configuration. The differential deflection between the two rails right before the impact had a linear correlation with the resulting contact stresses on the rail head. Supporting joints were better at reducing bar stresses, especially on wood ties. Certain product features can greatly influence the bar and the adhesive stresses of the insulated rail joint.

01595166

16-0547

English

pp 1–10

2016

Transportation Research Record: Journal of the Transportation Research Board

9780309369671

Print

Figures (8) ; References (30) ; Tables (1)

Finite element method; Rail joints; Railroad tracks; Rolling contact; Stresses

Design; Railroads

PRP, TRIS, TRB, ATRI

Jan 12 2016 4:23PM

• Application of Light Detection and Ranging Technology to Assess Safe Passage of Low-Ground-Clearance Vehicles at Highway–Rail Grade Crossings
• Decision Tree Approach to Accident Prediction for Highway–Rail Grade Crossings: Empirical Analysis
• Design and Performance of Well-Performing Railway Transitions
• Dynamic Vehicle–Track Model to Study the Effects of Track Geometry and Vehicle–Track Interaction on Concrete Tie Rail Seat Load Environment
• Effects of Rail Hardness on Rail Wear and Head Check Initiation
• Evaluating the Correlation Between the Geotechnical Index and the Electromagnetic Properties of Fouled Ballasted Track by a Full-Scale Laboratory Model
• Finite Element Analysis of the Effects of Bolt Condition on Bolted Rail Joint Stresses
• How to Put Light Rail on a Floating Bridge: Experimental Evaluation of a Novel Approach
• Microwave Radar Vehicle Detection Performance at Railroad Grade Crossings with Quad Gates in Normal and Adverse Weather Conditions
• Morphological Characterization of Railroad Ballast Degradation Trends in the Field and Laboratory
• Rehabilitation of Railway–Highway At-Grade Crossings: Recommendations and Guides
• Risk-Based Optimization of Rail Defect Inspection Frequency for Petroleum Crude Oil Transportation
• Use of Power Spectral Density for Effective Turnout Geometry Maintenance