01558136

Component

https://doi.org/10.3141/2483-11

The current version of the Highway Capacity Manual 2010 (HCM 2010) gives guidance on commercial truck speeds on grade through the use of truck speed versus distance–grade curves, which are located in the HCM 2010, Chapter 11. These curves are designed to allow the analyst to estimate a commercial truck’s speed after it travels on a known distance of roadway with a certain grade. Typically, these curves are used to determine an equivalent grade (incline–decline and length) that will result in the same final speed of commercial trucks as would the series of grades making up a composite grade. The HCM 2010 curves were developed as a result of studies that used simulation tools. These simulation tools used a simple lookup table approach for maximum acceleration versus speed and did not account for commercial truck transmission gear–changing capabilities. These shortcomings, along with changes in truck performance over the past 20 years, necessitate an update to the HCM 2010 speed versus distance–grade curves. This study presents the development of updated speed versus distance–grade curves for commercial trucks by using TRUCKSIM. This simulation tool uses a modeling approach of full-vehicle dynamics, which ensures that commercial truck performance is accurately represented for field conditions. The results show that the performance of commercial trucks, as presented in the HCM 2010, is worse than that currently observed. Therefore, the authors recommend that the current speed versus distance–grade curves included in the HCM be replaced with those presented in this study.

01587923

15-3505

English

pp 91–101

2015

Transportation Research Record: Journal of the Transportation Research Board

9780309369268

Print

Figures (11) ; References (17) ; Tables (1)

Commercial vehicles; Highway capacity; Highway grades; Motor vehicle dynamics; Speed; Trucks

Highway Capacity Manual 2010; TruckSIM (Computer program)

Highways; Motor Carriers; Operations and Traffic Management; Planning and Forecasting; I73: Traffic Control

TRIS, TRB, ATRI

Dec 30 2014 1:10PM

• A German Approach to Freeway Facility Evaluation
• Average Delay at Unsignalized Intersections for Periods with Variable Traffic Demand
• Calibrating VISSIM for the German Highway Capacity Manual
• Effect of an Upstream Traffic Signal on the Capacity of a Downstream Two-Way Stop-Controlled Intersection
• Evaluation of Methodologies for Analyzing Freeway Ramp Weaving
• Field-Derived Freeway Passenger Car Equivalents for Congested Conditions
• Generalized Effects of On-Street Parking Maneuvers on the Performance of Nearby Signalized Intersections
• Generating Scenarios of Freeway Reliability Analysis: Hybrid Approach
• Generic Speed–Flow Models for Basic Freeway Segments on General-Purpose and Managed Lanes in Undersaturated Flow Conditions
• Methodology to Compute Travel Time of a Roundabout Corridor
• On the Treatment of Trucks for Analysis of Freeway Capacity
• On the Treatment of Trucks in Roundabout Analyses
• Planning-Level Methodology for Freeway Facilities
• Relationship of Lane Width to Capacity for Urban Expressways
• Risk-Taking Behavior of Left-Turners in Gap Acceptance and Its Effects on Capacity Estimation at Signalized Intersections
• Vehicular Traffic Capacity at Unsignalized Crosswalks with Probabilistic Yielding Behavior