01584027

Component

https://doi.org/10.3141/2486-01

The diverging diamond interchange (DDI) has gained in popularity since its first implementation in the United States in 2009. The operational benefits and lower costs of retrofitting a conventional diamond with a DDI have contributed to increased use of the DDI. Research on DDIs has focused primarily on the assessment of operational benefits. Formal safety evaluations of DDIs are lacking. This study aimed to fill the knowledge gap by conducting a safety evaluation of DDIs using three types of before–after evaluation methods: naive, empirical Bayes, and comparison group. Three evaluation methods were used because each involved different trade-offs, such as data required, complexity, and regression to the mean. All three methods showed that a DDI replacing a conventional diamond decreased crash frequency for all severities. The highest crash reduction (59.3% to 63.2%) was observed for fatal and injury crashes. Crashes involving property damage only were reduced by 33.9% to 44.8%. Total crash frequency also decreased by 40.8% to 47.9%. A collision diagram analysis revealed that the DDI, as compared with a diamond, traded high-severity crashes for lower-severity crashes. Whereas 34.3% of ramp terminal fatal and injury crashes in a diamond occurred in left-turn angle crashes with oncoming traffic, the DDI eliminated this crash type. One potential concern for the DDI is the possibility of wrong-way crashes, but only 4.8% of all fatal and injury crashes occurring at the ramp terminal of a DDI were wrong-way crashes. The DDI offers significant crash reduction benefits over conventional diamond interchanges.

01582968

15-0946

English

pp 1–10

2015

Transportation Research Record: Journal of the Transportation Research Board

9780309369220

Print

Figures (3) ; References (17) ; Tables (4)

Before and after studies; Crash rates; Diamond interchanges; Traffic safety; Wrong way driving

Missouri

Design; Highways; Operations and Traffic Management; Safety and Human Factors; I20: Design and Planning of Transport Infrastructure; I82: Accidents and Transport Infrastructure

PRP, TRIS, TRB, ATRI

Dec 30 2014 12:24PM

• Analysis of Vehicle Speeds and Speed Differentials in Curves
• Design Criteria for Minimum Passing Zone Lengths: Operational Efficiency and Safety Considerations
• Economic Assessment of Access Management Projects in the Houston, Texas, Region
• Effect of Stopping Sight Distance on Crashes at Crest Vertical Curves on Rural Two-Lane Highways
• Empirical Evaluation of J-Turn Intersection Performance: Analysis of Conflict Measures and Crashes
• Influences of Cross-Sectional Design Elements at Urban Arterial Driveway Locations
• Pedestrian and Bicyclist Accommodations and Crossings on Superstreets
• Use of Access Travel Time to Estimate the Impact of Driveway Restrictions on Corner Lot Developments
• Use of Decision Assistance Curves in Advanced Warrant Analysis for Indirect Left-Turn Intersections