01548817

Component

https://doi.org/10.3141/2443-08

http://scholar.google.com...akis&publication_year=2014

This study investigated the effect of the input level of axle load spectra on performance predictions obtained with the Mechanistic–Empirical Pavement Design Guide (MEPDG). Traffic monitoring data collected from 50 weigh-in-motion (WIM) stations distributed across the state of Ohio were analyzed to obtain site-specific and regional axle load spectra. The site-specific axle load spectra were calculated for each axle group (single, tandem, tridem, and quad) and truck class (Classes 4 through 13). The regional axle load spectra were developed on the basis of statewide averages and cluster analysis. The statewide average was calculated with information from all sites, whereas the cluster averages were created on the basis of Class 9 tandem axles. Baseline designs for new flexible pavements were defined in the MEPDG for each of the WIM sites having available data, and site-specific, statewide average, cluster average, and MEPDG default axle load spectra were used to assess the impact of the input level of axle load spectra on the performance of the pavement structure. The statewide average and the cluster averages were found to yield similar predictions of pavement performance, with the cluster averages being slightly closer to the site-specific predictions of pavement performance. In addition, the MEPDG default axle load spectra were found to underestimate the pavement service life significantly and, if used for design purposes, would result in overly conservative pavement layer thicknesses. Therefore, the authors recommend the use of site-specific axle load spectra when possible in the design of flexible pavements. However, if site-specific data are not available, statewide average axle load spectra should be used.

01548337

14-3555

English

pp 63–77

2014

Transportation Research Record: Journal of the Transportation Research Board

9780309295314

Print

Figures (9) ; References (30) ; Tables (2)

Axle load force; Flexible pavements; Mechanistic-empirical pavement design; Pavement performance

Ohio

Data and Information Technology; Design; Highways; Operations and Traffic Management; Pavements; I22: Design of Pavements, Railways and Guideways

TRIS, TRB, ATRI

Jan 27 2014 3:13PM

• Algorithm for Detector-Error Screening on Basis of Temporal and Spatial Information
• Application of Seasonal Adjustment Factors to Subsequent Year Data
• Automated Analysis of Pedestrians’ Nonconforming Behavior and Data Collection at an Urban Crossing
• Estimating Spatially and Temporally Continuous Bicycle Volumes by Using Sparse Data
• Estimation of Annual Average Daily Bicycle Traffic with Adjustment Factors
• Exploring Bias in Traffic Data Aggregation Resulting from Transition of Traffic States
• Hybrid Prediction Approach Based on Weekly Similarities of Traffic Flow for Different Temporal Scales
• Identification of Network Sensor Locations for Estimation of Traffic Flow
• Institutionalizing Bicycle and Pedestrian Monitoring Programs in Three States
• Process to Determine Locations for Motorcycle Counts
• Reidentification of Trucks on Basis of Axle-Spacing Measurements to Facilitate Analysis of Weigh-in-Motion Accuracy
• Semiautomated Tool for Extraction of Microlevel Traffic Data from Videographic Survey
• Software-Based Vehicle Reidentification with Existing Loop Infrastructure
• Vehicle Detector Evaluation Based on Concepts of Traceability and Confidence Interval
• Vehicle Length Measurement and Length-Based Vehicle Classification in Congested Freeway Traffic