01520784

Component

https://doi.org/10.3141/2443-01

http://scholar.google.com...fman&publication_year=2014

Classified-vehicle counts are a critical measure for forecasting the health of the roadway infrastructure and for planning future improvements to the transportation network. Balancing the cost of data collection with the fidelity of the measurements, length-based vehicle classification is one of the most common techniques used to collect classified-vehicle counts. Typically, the process of classifying vehicles by length uses a pair of detectors in a given lane to measure effective vehicle length. While the calculation is simple and seems well-defined, this paper demonstrates that small changes in the calculations can lead to large differences in performance during challenging conditions. In particular, most conventional calculations assume that acceleration can be ignored, and this assumption simply is not the case in congested traffic. As a result, many operating agencies are reluctant to deploy classification stations on roadways where traffic is frequently congested. This study examined six variations of the conventional calculation of vehicle length and developed a seventh that also estimated constant acceleration. The study then highlighted two of these approaches that worked well in extreme conditions on freeways for speeds as low as 15 mph. This range should be sufficient for most applications. Then, with empirically collected data, the authors found that the extreme events were uncommon and even the conventional method did quite well in stop-and-go traffic because the slower that traffic moved, the lower was the flow during that period. In any event, the key to success is the use of well-tuned detectors.

01548337

14-0034

English

pp 1–11

2014

Transportation Research Record: Journal of the Transportation Research Board

9780309295314

Print

Figures (6) ; References (21) ; Tables (4)

Acceleration (Mechanics); Accuracy; Loop detectors; Measurement; Traffic congestion; Vehicle classification; Vehicle length

Data and Information Technology; Highways; Operations and Traffic Management; I72: Traffic and Transport Planning

TRIS, TRB, ATRI

Jan 27 2014 2:08PM

• Algorithm for Detector-Error Screening on Basis of Temporal and Spatial Information
• Application of Seasonal Adjustment Factors to Subsequent Year Data
• Automated Analysis of Pedestrians’ Nonconforming Behavior and Data Collection at an Urban Crossing
• Effect of Traffic Load Input Level on Mechanistic–Empirical Pavement Design
• Estimating Spatially and Temporally Continuous Bicycle Volumes by Using Sparse Data
• Estimation of Annual Average Daily Bicycle Traffic with Adjustment Factors
• Exploring Bias in Traffic Data Aggregation Resulting from Transition of Traffic States
• Hybrid Prediction Approach Based on Weekly Similarities of Traffic Flow for Different Temporal Scales
• Identification of Network Sensor Locations for Estimation of Traffic Flow
• Institutionalizing Bicycle and Pedestrian Monitoring Programs in Three States
• Process to Determine Locations for Motorcycle Counts
• Reidentification of Trucks on Basis of Axle-Spacing Measurements to Facilitate Analysis of Weigh-in-Motion Accuracy
• Semiautomated Tool for Extraction of Microlevel Traffic Data from Videographic Survey
• Software-Based Vehicle Reidentification with Existing Loop Infrastructure
• Vehicle Detector Evaluation Based on Concepts of Traceability and Confidence Interval