01478903

Component

https://doi.org/10.3141/2374-21

http://scholar.google.com...nger&publication_year=2013

Class I freight railroads nearly exclusively use premium, high-quality ballast aggregates such as granite, trap rock, and quartzite for their mainline ballast needs. These natural virgin aggregates are crushed stones with certain geologic origins, and their properties may vary significantly depending on quarry sources and production techniques. Findings are presented from a comprehensive laboratory study on ballast aggregates undertaken at the University of Illinois to investigate differences in engineering behavior of premium railroad ballast materials obtained from 13 quarries across the Union Pacific Railroad system. Laboratory research tasks consisted of gradation analysis; quantifications of shape, texture, and angularity properties with the University of Illinois aggregate image analyzer; shear strength evaluation by using large direct shear (shear box) tests; and ballast degradation and durability analyses with Los Angeles abrasion tests conducted at 400 and 1,000 turns and evaluations of subsequent ballast fouling. As the compacted ballast voids ratio increased, aggregate strength typically decreased because of lower solid densities obtained from shear box testing. Aggregate shape properties quantified through imaging-based shape indices were shown to be linked to the strength properties of different ballast density groups. One of the ballast aggregates with flat and elongated particles but very strong mineralogy had quite high strength properties despite the tendency for particles to break during shearing. Higher angularities that generally resulted in higher strength properties could also yield higher fouling and increased breakdown potential of the aggregates.

01503754

13-4338

English

pp 180–189

2013

Transportation Research Record: Journal of the Transportation Research Board

9780309286893

Print

Figures (5) ; References (7) ; Tables (6)

Abrasion tests; Aggregates by shape and surface texture; Angularity; Ballast (Railroads); Durability; Laboratory tests; Maintenance of way; Properties of materials; Shear strength

Los Angeles Abrasion Test

Maintenance and Preservation; Materials; Railroads; I36: Aggregates; I60: Maintenance

TRIS, TRB, ATRI

Feb 5 2013 12:50PM

• Characterization of Railroad Ballast Behavior Under Repeated Loading: Results from New Large Triaxial Test Setup
• Comparison of Capacity of Single- and Double-Track Rail Lines
• Competitiveness of High-Speed Rail: Analysis for Corridor Between Lisbon, Portugal, and Madrid, Spain, Based on Discrete Choice Models
• Development of Multicriteria Decision Method for Evaluating High-Speed Rail Corridor
• Development of Two-Stage Hybrid Method to Solve High-Speed Rail Train Scheduling Problem
• Dynamic Wheel Loads of High-Speed Rail at Speeds Greater Than 400 km/h
• Economic Impacts of Amtrak Intercity Passenger Rail Service in Michigan: Community-Level Analysis
• Hierarchical Decomposition Methods for Periodic Railway Timetabling Problems
• High-Speed Rail Network Design and Station Location: Model and Sensitivity Analysis
• Impact of European Railway Traffic Management System on Human Performance in Railway Operations: European Findings
• Impacts of Short-Term Land Use by High-Speed Rail on Large Metropolises: Case Study of Madrid, Spain
• Measuring Rail Seat Pressure Distribution in Concrete Crossties: Experiments with Matrix-Based Tactile Surface Sensors
• Modeling Rail Operating Costs for Multimodal Corridor Planning
• Predicting Potential Railway Operational Disruptions with Echo State Networks
• Safety Effectiveness of Integrated Risk Reduction Strategies for Rail Transport of Hazardous Materials
• Simulating Ballast Shear Strength from Large-Scale Triaxial Tests: Discrete Element Method
• Simulation-Based Rail Transit Optimization Model
• System for In Situ Measurement of Neutral Temperature in Continuous-Welded Rail: Results from Laboratory and Field Tests
• Track Stiffness Transition Zone Studied with Three-Dimensional Sandwich Track Model
• Ultrasonic Tomography for Three-Dimensional Imaging of Internal Rail Flaws: Proof-of-Principle Numerical Simulations
• Use of Recycled Tire Rubber to Modify Track–Substructure Interaction